About Me Analyser

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lapfix
    Badcaps Legend
    • Mar 2020
    • 2700
    • my workshop
    #1

    About Me Analyser

    facing this issue and can't find what i miss

    installing python at win 20H2 with his 3 Python modules:

    colorama
    crccheck
    pltable

    All is ok but when i try to open me analyser it just make w cmd windows than quikly dissappear !

    What i must install too , vc_redist.x64 and VBA65-KB974945-x86-ENU are installed too .
    Attached Files
    Tags: None
    • lapfix
      Badcaps Legend
      • Mar 2020
      • 2700
      • my workshop
      #2
      Re: About Me Analyser

      Solve it by just excute CMD as admin

        Comment

        Previous template Next

        Related Topics

        Collapse
        • reformatt
          Create MEAnalyzer executable from Github Python Scripts
          by reformatt
          Each new release of ME Analyzer only has the scripts but no executable file. It's handy for me to just run the exe in Windows, so came up with the following guide for those that might want it. Didn't see anywhere else how to do it, apologies if it is documented somewhere and I've just missed it.

          ME Analyzer – create Windows executable from Python script from GitHub

          1. Install Python 3.xx from https://www.python.org/downloads/ – select to add Python to PATH during installation. Current version is Python V3.11.

          2. Open an elevated Windows Command Prompt...
          02-06-2023, 07:33 AM
        • GlennB1975
          DFI EL336 motherboard cpu fans run but reset light lit on pci analyser
          by GlennB1975
          Hi there.

          First of all thanks for having me. I’ve posted in the introduce yourself section a little bit about myself.

          I have recently purchased two faulty motherboards for a fruit machine that i have, these PC’s are getting very hard to find now with them getting older, so seeing as ive had a bit of experience with repairing Nintendo DS’s i thought id try my hand at PC repair too.

          The first motherboard(ive not looked at the second one in any detail yet) has an issue which it will start up, the CPU fans spin but it does not post to BIOS, I get a slight...
          1 Photo
          03-07-2024, 09:10 AM
        • pretendjury84
          Decrypt Keychain file
          by pretendjury84
          Hi,

          Sorry if this is posted in the wrong section.

          I need to decrypt a .keychain file. The methods listed on github (https://github.com/n0fate/chainbreaker) unfortunately dont seem to work. Im getting stuck on the first bit,
          1. Navigate to the directory containing the file setup.py
          2. Enter the command (from terminal): $ python setup.py bdist_wheel -d dist. This creates a wheel file (extension: .whl) in the /dist folder.
          qashifmasud@Qashifs-MacBook-Pro chainbreaker-master % python setup.py bdist_wheel -d dist
          zsh: command not found: python

          qashifmasud@Qashifs-MacBook-Pro...
          10-12-2024, 02:31 AM
        • TheQuentincc
          No Intel Management Engine (ME) version detected in bios
          by TheQuentincc
          Hi, I have a few different motherboard from different vendor and generation (Z77, Z87 and X99) that are "missing" the Intel ME.
          I successfully flashed the bios using an external programmer with the bios file directly downloaded from the manufacturer and verified the ME was present (in the file) with the "ME Analyser" python script.
          Then after flashing and doing a full clear cmos and so on I still have the ME missing (detected as "N/A") with some functionnality (depending on the board) missing such as frequency reading/overclocking and so on.
          I...
          03-02-2023, 05:57 AM
        • Byte_76
          Requesting assistance with 486 motherboard repair
          by Byte_76
          I have a seemingly rare 486 motherboard which shows no signs of life.

          The Motherboard is marked with the labels B887 / 8 / 9 AI, which seems to be a Mecer branded board.

          With an AT power supply hooked up, the power supply turns on but the board does not post, there is no beep and there is nothing displayed on the post analyser card, whether it's plugged into a PCI slot or an ISA slot.

          I found a thread on Vogons of someone else who had the same board in working condition.

          What I've tried so far: (In each case, the symptoms remain unchanged as...
          Full motherboard view
          9 Photos
          04-12-2025, 06:43 AM
        • Loading...
        • No more items.
        Working...