----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Mọi khoản quyên góp cho Badcaps đều được hoan nghênh . Trở thành người ủng hộ Badcaps >>>>> nhấp vào liên kết này để quyên góp <<<<< Cảm ơn tất cả những người ủng hộ . -------------------------------------------------------------------------------------------------------------------------------------------------------------
Sir, please help me, because I have already flashed the bios on the front, the one circled in red in the picture, but it still doesn't want to display, I checked the back and there are two bios chips, do I need to flash that too with the same bin file?
First boot load bios factory defaults, save and exit and then at the next boot disable security options
You must fill your DMI manually. Good Luck
Sir, please help me, because I have already flashed the bios on the front, the one circled in red in the picture, but it still doesn't want to display, I checked the back and there are two bios chips, do I need to flash that too with the same bin file?
Sir, please help me, because I have already flashed the bios on the front, the one circled in red in the picture, but it still doesn't want to display, I checked the back and there are two bios chips, do I need to flash that too with the same bin file?
thank you so much sir
appreciated
HERE ARE MY 2 BIOS BIN ORIGINAL
can anyone help me for this please,.i need it badly
>Explain you were not able to succeed with the methods at BIOS guides, methods, resources and tools
>
python ./main.py "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.BIN" --output-dir "/mnt/c/temp/205605f9e1b60403a41787efeffe9cad-flas_maybe5.txt"
------------------------------------------------...
i need some help :-/
i deleted in Bios the Admisnistrator password with old password, but after it didn't allow me to modify the User password. Now i can't boot, enter the bios or do anything. It asking at boot for password, old password don't work...
Could you please remove all password related stuff from this bios. A hate Asus....
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries...
Password removal option for those who do not have a method through HPUnlocker.
This option saves all information in the BIOS (serial number, Windows key, etc.) and also excludes the appearance of BIOS notifications at startup (hp endpoint security controller problem).
1. Read BIOS (32MB) and EC (16MB) firmware.
Be sure to make backups.
2. EC:
2.1) Copy the area from the original and paste into a clean "EC (16MB) Clean".
Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.
My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).
Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
Comment