Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Please help unlock this 830 G8 sn 5CG225A1MT, thanks!...
-
very sorry, there's been a problem in my files. in my previous post, i shared the wrong files because of a coincidence with their naming. very, very sorry SMDFlea and LBTT1121!!!! this time i share the correct files. so, i am back to the attached files that work (for sure!), but give TPM error.....
Leave a comment:
-
with these files it does turn on, but no image and loop reboots......
Leave a comment:
-
-
with these files, it doesn't turn on at all. it lights the charging led only once and that's it. doesn't do anything else. i saw it has this kind of reaction with files from Mockingbird CML (Cometlake) not my specific one, ICL (IceLake)....
Leave a comment:
-
-
UPDATE, i tried with some factory files from a 14" thread with the same motherboard, i attach the files, the service tag can be set, also the model, but gives TPM Device not detected. What to do in this situation?...
Leave a comment:
-
-
Hi, i am having trouble with an Inspiron 5501 mobo Mockingbird ICL MB 8L with st:JGRGZZ2. it came with no initialization.
i tried with a pair of new 8mb + 16mb files and it worked but couldn't make the service tag to be saved. so i put the 16mb original file to see if it makes a difference, it also worked but still with the service tag problem. i tried to clear me it's original file but it didn't work.
so, can you help me with this service tag error? i attach the two original files 8mb + 16mb and the 8mb file with with it works but can't save the servicetag.
thanks in advanc...
Leave a comment:
-
hi, can you please help me unlock this 830 g8? sn 5 cg2252gdm
thanks in advance...
Leave a comment:
-
-
hi, can you please help me unlock this 450 G8? sn 5CD2051V91
thank you very much!...
Leave a comment:
-
I looked through your posts an didn't find anyone that said it worked... maybe i didn't look that good? has anyone succeed with the shorting method?...
Leave a comment:
-
I wrote the file you gave me, still SVP error.... i will look through your posts now...
Leave a comment:
-
Volinakis, I got rid of SVP error but it still asks for password(Did the programming with internal and CMOS battery connected and after programming i immediately disconnect both batteries)
Leave a comment:
-
hi,
i have a locked T14 gen1. Serial number can't be read unfortunately(the sticker is torn) , i don't know what details to give you in such case, except the board is NM-C631.
I managed to read the Nuvoton NPCE68 with SVOD4, i attach the file.
I tried to remove the password by comparing with the file for SSDD that MAXpower3 gave.
Now it gives me "bad SVP data" error and shuts down. I also attach the file i modified.
Please help me
Later edit: i also modify only the areas that Maxpower mentioned (3C420 to 3C45F and 3D420 to 3D45F) and also, BAD SVP...
Leave a comment:
-
-
Hello,
can you help me unlock BIOS and disable Absolute for this Dell Latitude 3420 st:F3C8PG3,
thanks in advance!...
Leave a comment:
No activity results to display
Show More
Leave a comment: