DAY0DDMBAE0 REV E bios needed

[bestdan50]

DAY0DDMBAE0 REV E cleane me bios needed

[peste]

Re: DAY0DDMBAE0 REV E bios needed

DAY0DDMBAE0 REV E cleane me bios needed

post the name and full model of the laprop

[bestdan50]

Re: DAY0DDMBAE0 REV E bios needed

post the name and full model of the laprop

hp spectre x360 model 8260ngw

[SMDFlea]

Re: DAY0DDMBAE0 REV E bios needed

hp spectre x360 model 8260ngw

8260NGW is the wifi card part number

[extrexxx]

Re: DAY0DDMBAE0 REV E bios needed

8260NGW is the wifi card part number

need clean me hp spectre pro x360 g2, model w4c58us#aba boardAY0DDMBAE0 REV:E WINBOND 25Q128FV
THX IN ADVANCE

[hardware1]

Re: DAY0DDMBAE0 REV E bios needed

need clean me hp spectre pro x360 g2, model w4c58us#aba boardAY0DDMBAE0 REV:E WINBOND 25Q128FV
THX IN ADVANCE

Where is your backup file?

[djshan0027]

Re: DAY0DDMBAE0 REV E bios needed

[gsmkings]

HP DAY0DDMBAE0 REV E Bios

Hello can anyone please clear the bios password below
HP Spectre X360
Model : 13-4159nd
DAY0DDMBAE0 Rev E

many thanks

[Vesko356]

Re: HP DAY0DDMBAE0 REV E Bios

Hello can anyone please clear the bios password below
HP Spectre X360
Model : 13-4159nd
DAY0DDMBAE0 Rev E

many thanks

Next time add serial number in your request.

Yours is 5CD547BX8C, use it to find the support page for your model
https://support.hp.com/us-en/drivers...ber=5CD547BX8C

Download bios update file, run the exe, select copy to save the extracted bios to a folder.

https://www.badcaps.net/forum/showth...36#post1259536

The bios update in your case has 4 different BID numbers - 0820D, 0804E, 0804F and 08035, find which one to choose by the matching BID in your bios backup

https://www.badcaps.net/forum/showth...41#post1259541

Transfer DMI and Windows key from your bios to the one with the matching BID using Hex editor of your choice and following offsets:
DMI: 61CF00 - 61D0FF
Windows key: 63E000 - 63E03F

Program the chip with the new dump.
Done.

[Guide] How to extract ready for programming dump from HP update executable file
https://www.badcaps.net/forum/showthread.php?t=121948


.

[gsmkings]

Re: HP DAY0DDMBAE0 REV E Bios

Next time add serial number in your request.
.

Thanks for the pointers, next time I will include my serial, I seem to have issues extracting the bin file from the bios update file will the exex only run on a hp laptop ?

[SMDFlea]

Re: HP DAY0DDMBAE0 REV E Bios

Thanks for the pointers, next time I will include my serial, I seem to have issues extracting the bin file from the bios update file will the exex only run on a hp laptop ?

It will run on almost any.Its best not to use win 7 ,it can crash sometimes.

.

[gsmkings]

Re: HP DAY0DDMBAE0 REV E Bios

It will run on almost any.Its best not to use win 7 ,it can crash sometimes.

.

Thanks all done and programmed, laptop boots into bios but has a message prior to boot
"Manufacturer Programming model is in unlock mode"
and its unusually slow booting any pointers appreciated

[Vesko356]

Re: HP DAY0DDMBAE0 REV E Bios

Thanks all done and programmed, laptop boots into bios but has a message prior to boot
"Manufacturer Programming model is in unlock mode"
and its unusually slow booting any pointers appreciated

Upload the dump you've made to flash the chip with here.
You can use HP Bios Configuration Utility to exit MPM mode.

.

[gsmkings]

Re: HP DAY0DDMBAE0 REV E Bios

Upload the dump you've made to flash the chip with here.
You can use HP Bios Configuration Utility to exit MPM mode.

.

Hi thanks files uploaded

[Vesko356]

Re: HP DAY0DDMBAE0 REV E Bios

Hi thanks files uploaded

Yes, you did a good job, I've just checked your file and it's OK.
As a remark - you choose the latest version (F.54), but I think it's best to pick the same bios version as in your dump (F.42) initially (to avoid any possible issues) and if you wish the latest version you can update it later running the update at the target machine by choosing "update the system BIOS on this device" option.
Below is F.42 bios with your DMI and Windows key, and I also fixed "Manufacturer Programming mode is in unlock mode" issue so you don't have to use the HP BCU later to deal with it.

[gsmkings]

Re: HP DAY0DDMBAE0 REV E Bios

Yes, you did a good job, I've just checked your file and it's OK.
As a remark - you choose the latest version (F.54), but I think it's best to pick the same bios version as in your dump (F.42) initially (to avoid any possible issues) and if you wish the latest version you can update it later running the update at the target machine by choosing "update the system BIOS on this device" option.
Below is F.42 bios with your DMI and Windows key, and I also fixed "Manufacturer Programming mode is in unlock mode" issue so you don't have to use the HP BCU later to deal with it.

I can't thank you guys enough Vesko356 and SMDflea , another nice day at the University of Badcaps , i am off to the donation link to show my gratitude.
Thanks again

[Vesko356]

Re: HP DAY0DDMBAE0 REV E Bios

I can't thank you guys enough Vesko356 and SMDflea , another nice day at the University of Badcaps , i am off to the donation link to show my gratitude.
Thanks again

You're welcome. Happy to help.
Thank you, your support is much appreciated.

.

[rabsonnjala]

Re: DAY0DDMBAE0 REV E bios needed

need clean me. for this attached bios

[Vesko356]

Re: DAY0DDMBAE0 REV E bios needed

need clean me. for this attached bios

Read the rules before posting, and then read post #9.
RULES UPDATE for BIOS requests/offers *AVOID BANNING, READ BEFORE POSTING*

.