---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
i thnk the bios chip is broken. thats whty it cannot be read. can i just replace it with other same brand winbond then write the bios bin file. is someone share it.
i thnk the bios chip is broken. thats whty it cannot be read. can i just replace it with other same brand winbond then write the bios bin file. is someone share it.
Wrong,see post #7 .The W25Q80 is 8 megabits,not megabyes.It is 1MB megabyte, an 8MB bios will not fit onto it
If you are using a chip clip, remove all batteries from the main board, including the CMOS battery.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
finally i found it this is my backup bios laptop no power
The chip is not SOIC16 ,it has 8 legs,so choose @SOIC8 .The programmer probably read it ok but check it yourself next time and choose the chip manually by the part number on top of the chip and the type of package, SOIC8,SOIC16,WSON8 etc
The chip is not SOIC16 ,it has 8 legs,so choose @SOIC8 .The programmer probably read it ok but check it yourself next time and choose the chip manually by the part number on top of the chip and the type of package, SOIC8,SOIC16,WSON8 etc
Comment