Announcement

Collapse
No announcement yet.

Acer NITRO 5 AN515-57 need a clean bios

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Originally posted by uncleSHANNN View Post
    Hi team
    Originally I unlocked advanced settings in bios change a setting and bricked the laptop. I tried to learn all the settings which in future I still plan to learn with caution now.
    So adding another problem after mistakenly flashing my spi chip I reflashed it with the back up file It doesn't seem to be in the state it was before hand.
    I'm using ezp2023 and both bios and spi chips are
    Xm 25QH128AHIG attached are my backup files thank you in advanced

    Acer nitro 5 an515-57
    chipset:gh53g la-l191p rev 1c
    S/N:NHQEUSA0041390A9DB3400
    SNID: 13904348334
    Sio orignal.rom from Xm 25QH128AHIG
    And where did you get the acernitro5-.rom from ?


    ----------------------------------------------------------------------------------------------------------------------------------------------------------
    All donations to Badcaps are welcome.
    Become a Badcaps supporter
    >>>>> click on this link to donate <<<<<
    Thanks to all supporters.
    ----------------------------------------------------------------------------------------------------------------------------------------------------------​

    Comment


      Originally posted by hoaca388 View Post

      Sio orignal.rom from Xm 25QH128AHIG
      And where did you get the acernitro5-.rom from ?
      Backed up bios file when the laptop was running.

      Comment


        Need clear me bios for Acer Nitro 5 LA-L181P rev 1C

        Model: Acer Nitro AN515-57-59F2. GH51G LA-L181P rev 1C, SN: NHQESEP00C151234DB3400
        Please help me. after change SRKMA , FH82HM570 Intel Platform Controller Hub i have black screen. all voltages are normal.
        Attached Files

        Comment


          Hi all.

          Please can you help me with clean ME region .
          After replace PCH, BIOS not view NVME .
          I trying any another BIOS, but notebook it doesn't start.
          With original BIOS, NB normal start.
          System boot from USB, but not view NVME drive.

          For any help, thank so much.

          Acer Nitro 5 - AN515-57-63XD model no.: N20C1
          MB : GH51G, LA-L181P rev.:1C
          PCH : SRKMA
          CPU i5-11400H
          S/N : NHQESEC00415203D2C3400
          SNID : 15201566034


          Attached Files

          Comment


            Originally posted by senyaxis View Post
            Need clear me bios for Acer Nitro 5 LA-L181P rev 1C

            Model: Acer Nitro AN515-57-59F2. GH51G LA-L181P rev 1C, SN: NHQESEP00C151234DB3400
            Please help me. after change SRKMA , FH82HM570 Intel Platform Controller Hub i have black screen. all voltages are normal.
            bios cleaned. Cleaning guides -> https://www.badcaps.net/forum/troubl...22#post1622422
            Attached Files
            All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

            Comment


              Originally posted by bushmann View Post
              Hi all.

              Please can you help me with clean ME region .
              After replace PCH, BIOS not view NVME .
              Bios cleaned. Guide -> https://www.badcaps.net/forum/troubl...22#post1622422
              Attached Files
              All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

              Comment


                Originally posted by SMDFlea View Post
                Thank you, SMDFlea!
                I wrote down the edited bios - the symptoms did not change. Can you check the mulicontroller firmware?
                Attached Files

                Comment


                  I feel like I'm running in circles.
                  I have a customer who was messing in bios and could no longer get laptop to post would turn on keyboard would light but no image or post.
                  SO i attempted to manually flash bios using AsProgrammer, CH341a and bios bin from ACER Site now i get power light for a few seconds no keyboard lights and power light goes off.
                  I Have looked over the guides and I'm not sure if its the chip I'm selecting on the ASprogram or if i just don't have the correct file.
                  I'm selecting Chip XM25qh128 however the chip markings show qh128ahig

                  Model is AN515-57-79TD Serial NHQESAA005212084FF7000 Board number shows la-l181p revision 1B



                  Comment


                  • peste
                    peste commented
                    Editing a comment
                    merged post

                  Originally posted by erickirchey View Post
                  I feel like I'm running in circles.
                  I have a customer who was messing in bios and could no longer get laptop to post would turn on keyboard would light but no image or post.
                  SO i attempted to manually flash bios using AsProgrammer, CH341a and bios bin from ACER Site now i get power light for a few seconds no keyboard lights and power light goes off.
                  I Have looked over the guides and I'm not sure if its the chip I'm selecting on the ASprogram or if i just don't have the correct file.
                  I'm selecting Chip XM25qh128 however the chip markings show qh128ahig

                  Model is AN515-57-79TD Serial NHQESAA005212084FF7000 Board number shows la-l181p revision 1B



                  Try
                  Attached Files

                  Comment


                    Originally posted by erickirchey View Post
                    I feel like I'm running in circles.
                    I have a customer who was messing in bios and could no longer get laptop to post would turn on keyboard would light but no image or post.
                    SO i attempted to manually flash bios using AsProgrammer, CH341a and bios bin from ACER Site now i get power light for a few seconds no keyboard lights and power light goes off.
                    I Have looked over the guides and I'm not sure if its the chip I'm selecting on the ASprogram or if i just don't have the correct file.
                    I'm selecting Chip XM25qh128 however the chip markings show qh128ahig

                    Model is AN515-57-79TD Serial NHQESAA005212084FF7000 Board number shows la-l181p revision 1B



                    always post the original bios of the laptop even if it is corrupted..
                    Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:

                    >>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<

                    Every donation made will go towards server fees and maintenance costs.

                    Comment


                      Originally posted by peste View Post

                      always post the original bios of the laptop even if it is corrupted..
                      attached is what i backed up
                      Attached Files

                      Comment


                        Originally posted by senyaxis View Post

                        Thank you, SMDFlea!
                        I wrote down the edited bios - the symptoms did not change. Can you check the mulicontroller firmware?
                        The posted EC is corrupt. Here`s a new one extracted from your bios
                        Attached Files
                        All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                        Comment


                          Delete my post thanks I'll get help elsewhere.

                          Comment


                            Originally posted by Blaze Tech View Post

                            Try
                            I noticed two files RTK and TI I flashed both using NEOProgrammer as it is showing support for this Chip however i get the same just a power light for a few seconds. before flashing i would get keyboard lights as well what file should I be flashing here>?

                            Comment


                              Hello everybody. Please help me clean my ME area. BIOS does not show NVME. My Original Bios sometimes works, sometimes it doesn't, but when it does, it still accepts NVME The system boots from USB, but the NVME drive is not displayed. Thanks very much for any help
                              Acer Nitro 5 - AN515-57-54MV số model: N20C1
                              MB: GH51G, LA-L181P rev.:1C
                              PCH: SRKMA
                              CPU i5-11400H
                              S/N: NHQENSV0031491FBBA3400
                              SNID: 14912997834

                              Attached Files

                              Comment


                                Hello Masters...
                                The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.

                                Board code: La-l181p rev 1b
                                Serial no: NHQESEX002136064583400
                                3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
                                backup attached here
                                bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
                                Regards
                                Attached Files

                                Comment


                                  Originally posted by Ginés Priede Rivero View Post
                                  Hello Masters...
                                  The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.

                                  Board code: La-l181p rev 1b
                                  Serial no: NHQESEX002136064583400
                                  3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
                                  backup attached here
                                  bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
                                  Regards
                                  Your device is a laptop, please post in the right place. This is the area of the desktop.

                                  https://www.badcaps.net/forum/troubl...-requests-only


                                  ----------------------------------------------------------------------------------------------------------------------------------------------------------
                                  All donations to Badcaps are welcome.
                                  Become a Badcaps supporter
                                  >>>>> click on this link to donate <<<<<
                                  Thanks to all supporters.
                                  ----------------------------------------------------------------------------------------------------------------------------------------------------------​

                                  Comment


                                    Originally posted by Ginés Priede Rivero View Post
                                    Hello Masters...
                                    The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.

                                    Board code: La-l181p rev 1b
                                    Serial no: NHQESEX002136064583400
                                    3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
                                    backup attached here
                                    bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
                                    Regards
                                    Try the files one by one
                                    Attached Files

                                    Comment


                                      Originally posted by Ginés Priede Rivero View Post
                                      Hello Masters...
                                      The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.

                                      Board code: La-l181p rev 1b
                                      Serial no: NHQESEX002136064583400
                                      3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
                                      backup attached here
                                      bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
                                      Regards
                                      Thread moved and merged.
                                      All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                                      Comment


                                        Please help me. After replacing the chipset, my computer still does not recognize NVME
                                        Attached Files

                                        Comment

                                        Working...
                                        X