Hi team
Originally I unlocked advanced settings in bios change a setting and bricked the laptop. I tried to learn all the settings which in future I still plan to learn with caution now.
So adding another problem after mistakenly flashing my spi chip I reflashed it with the back up file It doesn't seem to be in the state it was before hand.
I'm using ezp2023 and both bios and spi chips are
Xm 25QH128AHIG attached are my backup files thank you in advanced
Sio orignal.rom from Xm 25QH128AHIG
And where did you get the acernitro5-.rom from ?
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Need clear me bios for Acer Nitro 5 LA-L181P rev 1C
Model: Acer Nitro AN515-57-59F2. GH51G LA-L181P rev 1C, SN: NHQESEP00C151234DB3400
Please help me. after change SRKMA , FH82HM570 Intel Platform Controller Hub i have black screen. all voltages are normal.
Please can you help me with clean ME region .
After replace PCH, BIOS not view NVME .
I trying any another BIOS, but notebook it doesn't start.
With original BIOS, NB normal start.
System boot from USB, but not view NVME drive.
Need clear me bios for Acer Nitro 5 LA-L181P rev 1C
Model: Acer Nitro AN515-57-59F2. GH51G LA-L181P rev 1C, SN: NHQESEP00C151234DB3400
Please help me. after change SRKMA , FH82HM570 Intel Platform Controller Hub i have black screen. all voltages are normal.
I feel like I'm running in circles.
I have a customer who was messing in bios and could no longer get laptop to post would turn on keyboard would light but no image or post.
SO i attempted to manually flash bios using AsProgrammer, CH341a and bios bin from ACER Site now i get power light for a few seconds no keyboard lights and power light goes off.
I Have looked over the guides and I'm not sure if its the chip I'm selecting on the ASprogram or if i just don't have the correct file.
I'm selecting Chip XM25qh128 however the chip markings show qh128ahig
Model is AN515-57-79TD Serial NHQESAA005212084FF7000 Board number shows la-l181p revision 1B
I feel like I'm running in circles.
I have a customer who was messing in bios and could no longer get laptop to post would turn on keyboard would light but no image or post.
SO i attempted to manually flash bios using AsProgrammer, CH341a and bios bin from ACER Site now i get power light for a few seconds no keyboard lights and power light goes off.
I Have looked over the guides and I'm not sure if its the chip I'm selecting on the ASprogram or if i just don't have the correct file.
I'm selecting Chip XM25qh128 however the chip markings show qh128ahig
Model is AN515-57-79TD Serial NHQESAA005212084FF7000 Board number shows la-l181p revision 1B
I feel like I'm running in circles.
I have a customer who was messing in bios and could no longer get laptop to post would turn on keyboard would light but no image or post.
SO i attempted to manually flash bios using AsProgrammer, CH341a and bios bin from ACER Site now i get power light for a few seconds no keyboard lights and power light goes off.
I Have looked over the guides and I'm not sure if its the chip I'm selecting on the ASprogram or if i just don't have the correct file.
I'm selecting Chip XM25qh128 however the chip markings show qh128ahig
Model is AN515-57-79TD Serial NHQESAA005212084FF7000 Board number shows la-l181p revision 1B
always post the original bios of the laptop even if it is corrupted..
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
I noticed two files RTK and TI I flashed both using NEOProgrammer as it is showing support for this Chip however i get the same just a power light for a few seconds. before flashing i would get keyboard lights as well what file should I be flashing here>?
Hello everybody. Please help me clean my ME area. BIOS does not show NVME. My Original Bios sometimes works, sometimes it doesn't, but when it does, it still accepts NVME The system boots from USB, but the NVME drive is not displayed. Thanks very much for any help
Hello Masters...
The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.
Board code: La-l181p rev 1b
Serial no: NHQESEX002136064583400
3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
backup attached here
bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
Regards
Hello Masters...
The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.
Board code: La-l181p rev 1b
Serial no: NHQESEX002136064583400
3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
backup attached here
bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
Regards
Your device is a laptop, please post in the right place. This is the area of the desktop.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Hello Masters...
The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.
Board code: La-l181p rev 1b
Serial no: NHQESEX002136064583400
3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
backup attached here
bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
Regards
Hello Masters...
The KBC backup is corrupt since it had to be replaced. I have tried some backup without success.
Board code: La-l181p rev 1b
Serial no: NHQESEX002136064583400
3v 5v ram v , processor v, clocks, aossilation ok, fan spins, processor warns, but there is no display
backup attached here
bios of acer website https://global-download.acer.com/GDF...CER&SC=EMEA_11
Regards
Comment