RCUnlocker

[wildemo]

Re: RCUnlocker

Hi upload your EC backup

Hey.Sorry im new in that is this EC?

[hoaca388]

Re: RCUnlocker

Hey.Sorry im new in that is this EC?

In the first boot , you have to go into bios setting fo disable all the security options.

[Udemzy]

Re: RCUnlocker

Pls how can solve this issue,I've reinstalled the operating system, install a new vcruntime but I still get the same error message.

[Ghamidi]

Re: RCUnlocker

In the first boot , you have to go into bios setting fo disable all the security options.

hi try dump of hoaca388

[Vesko356]

Re: RCUnlocker

Pls how can solve this issue,I've reinstalled the operating system, install a new vcruntime but I still get the same error message.

>

I already reinstalled Microsoft Visual C++ 2015 Redistributable, nothing has changed.

Install both x32 and x64 files.

Thanks, it worked.

[Udemzy]

Re: RCUnlocker

>

Thanks, I'll try it.

[sadenki]

Re: RCUnlocker

Hi, need help with HP G7 430 with power-on authentication, RCUnlocker won't take 32mb and 16mb work in software but password still present when power on.

Can someone give me a clue

[peste]

Re: RCUnlocker

Hi, need help with HP G7 430 with power-on authentication, RCUnlocker won't take 32mb and 16mb work in software but password still present when power on.

Can someone give me a clue

use RCUnlocker only for the 16MB chip..the 32MB one remains the same..

[sadenki]

Re: RCUnlocker

use RCUnlocker only for the 16MB chip..the 32MB one remains the same..

Thx for your help
Its not working, software take my 16MB dump, but when flash into IC laptop is still require password on power on :/

Here both version of 16MB dump (original and updated with RCUnlocker).

[ogre4273]

Re: RCUnlocker

Hello, i've been trying to get a dump of my bios using wson8 pogo pin probe and ch341a. After sticking the probe to the bios chip, the lights from the laptop powered on for a split second. After I assembled the laptop, POST error appears (is it because I removed CMOS battery? not sure) but the laptop boots fine. Now, do i need to disconnect all the connections from the board before using wson8 pogo pin probe or should I continue knowing the first scenario about laptop lights and possibly might short something?

And another problem, after I connected the battery, the laptop automatically powers on, is it normal?
Also after I put the back case, the caps lock stayed on for a few seconds and can only be booted by plugging the laptop from charger. Hopefully I did not damage my laptop.

Thank you for your help.

[peste]

Re: RCUnlocker

Hello, i've been trying to get a dump of my bios using wson8 pogo pin probe and ch341a. After sticking the probe to the bios chip, the lights from the laptop powered on for a split second. After I assembled the laptop, POST error appears (is it because I removed CMOS battery? not sure) but the laptop boots fine. Now, do i need to disconnect all the connections from the board before using wson8 pogo pin probe or should I continue knowing the first scenario about laptop lights and possibly might short something?

And another problem, after I connected the battery, the laptop automatically powers on, is it normal?
Also after I put the back case, the caps lock stayed on for a few seconds and can only be booted by plugging the laptop from charger. Hopefully I did not damage my laptop.

Thank you for your help.

remove the bios chip from the motherboard before reading or writing the bios chip, don't use the probe otherwise you might have errors... if you don't have an adapter socket for bios chips stick the bios chip on the programmer, or wires between the chip and programmer.. the laptop starts without pressing the ON button because you removed the bios battery..

https://www.youtube.com/watch?v=DWWigscuQDY

[ogre4273]

Re: RCUnlocker

remove the bios chip from the motherboard before reading or writing the bios chip, don't use the probe otherwise you might have errors... if you don't have an adapter socket for bios chips stick the bios chip on the programmer, or wires between the chip and programmer.. the laptop starts without pressing the ON button because you removed the bios battery..

https://www.youtube.com/watch?v=DWWigscuQDY

thank you for your reply, now I can't boot my laptop. The charging led is blinking orange and white and the caps lock is blinking with long durations and whenever I put on the battery, it automatically turns on. What should I do now? any help please.

[sadenki]

Re: RCUnlocker

So after some research, and as staded in my first post, the 32MB Main BIOS also need to be hex modify to be able to remove password on-power start.
I download couple of old and modify bit to understand what member modify, without succefully finding a method to remove it.
Can somebody lead me what should I modify to remove this dump "on-power password" that why customer don't set, and witch even HP with warrenty won't take it and ask ridiculous price to fix it ...

[sadenki]

Re: RCUnlocker

You're welcome.

Yes, it is possible.

Hey do you know if it can also work to remove user password for "power on authentication" ?
Maybe I do thing wrong, but same as Smiler, tool work and say unlocked, but power-on authentication is still there, can't acces bios to reset, so still stuck
Same laptop as Smiler, G7 830

[DanielDacko]

Re: RCUnlocker

Hi, need help with HP G7 430 with power-on authentication, RCUnlocker won't take 32mb and 16mb work in software but password still present when power on.

Can someone give me a clue

Give this a try, flash only 32MB file, leave the 16MB untouched. And leave feedback if it worked.

[sadenki]

Re: RCUnlocker

Give this a try, flash only 32MB file, leave the 16MB untouched. And leave feedback if it worked.

First test, working fine, I don't want to reset security setting as I fear windows won't launch anymore, i gonna rebuild laptop and edit to tell if it boot into windows.

Edit : No need to reset security setting, boot into windows just fine

Thx a lot DanielDacko and RethoricalCheese for your awesome tool

[DanielDacko]

Re: RCUnlocker

First test, working fine, I don't want to reset security setting as I fear windows won't launch anymore, i gonna rebuild laptop and edit to tell if it boot into windows.

Thx a lot DanielDacko and RethoricalCheese for your awesome tool

Glad to hear that it works, not done by RCUnlocker as it doesn't support 32Mb files.

[sadenki]

Re: RCUnlocker

First test, working fine, I don't want to reset security setting as I fear windows won't launch anymore, i gonna rebuild laptop and edit to tell if it boot into windows.

Edit : No need to reset security setting, boot into windows just fine

Thx a lot DanielDacko and RethoricalCheese for your awesome tool

Big news, customers came in, try 3 times is windows password, couldn't find it, reboot twice, and TADAAA, power-on security kick in.
So I gonna flash again with you modify bios, reset security and default setting, clean SSD, make a clean install and I should be fine

[ogre4273]

Re: RCUnlocker

Can I flash an older bios dump of the same laptop? because I updated the bios after saving and reading a dump.

[peste]

Re: RCUnlocker

Can I flash an older bios dump of the same laptop? because I updated the bios after saving and reading a dump.

yes.. you can write any bios version of the same laptop.. keep the original so you don't have problems.. and you can write it back when you want..