NEED BIOS FOR HP EliteBook 840 G5 6050a2945601-mb-a01

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • RAMADHAN KASIMU
    replied
    Hi everyone, I hope you all fine
    I have hp EliteBook 840 g5 with error "High end point security problem"
    and not turn on with power button (turn on by reset BIOS always) any one help me to rebuild or clean this bios file below and any solution to make my laptop turn on with its power button, because I have tried to change EC chip, BIOS and LED sensor.
    Anyone to help me to rebuild bios file below
    product ID 5TG90PC#ABG
    SN# 5CG9302234
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • RAMADHAN KASIMU
    replied
    Hi everyone, I hope you all fine
    I have hp EliteBook 840 g5 with error "High end point security problem"
    and not turn on with power button (turn on by reset BIOS always) any one help me to rebuild or clean this bios file below and any solution to make my laptop turn on with its power button, because I have tried to change EC chip, BIOS and LED sensor.
    Anyone to help me to rebuild bios file below
    product ID 5TG90PC#ABG
    SN# 5CG9302234
    Link https://drive.google.com/file/d/1m9G...usp=drive_link

    Leave a comment:


  • amitswami
    replied
    HP EliteBook 840 G5 6050a2945601-mb-a01
    bios ic removed in my motherboard not backup bios file available any one please provide working clear me bios
    PROID :3RF15UT#ABA
    5CG82848PZ

    Leave a comment:


  • hamza hamza
    replied
    can help me for clean me this bios
    HP EliteBook 840 G5
    NM: 6050A2945601 MB A01(A1)
    SN: 5CG8505KH2
    Thank you in advance
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • albologna
    replied
    Hello
    I have this Elitebook 840 G5 with no image, fan spins, total 0.250mHA consuption, little heat on PCH
    With me analizer on main bios says "Detected CSE Extension 0x03 with wrong Partition Hash at FTPR > FTPR.man"

    Serial 5CG9210D2C
    ProductID 2FA66AV
    Board 6050A2945601

    Can somebody Help me rebuilt?
    Uploaded Main bios with Ec chip bios
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • peste
    replied
    Originally posted by iaf86
    Hi, experts. I have an HP Elitebook 840 G5 with a locked bios password. Is there a method to remove the password without an EC chip? I can successfully remove passwords using patchers and RC unlockers, but I'd like to learn how to remove passwords using the main bios chip. I tried the HP unlocker, which created the unlock file but did not work. I attempted to delete the bios password manually using Hex editor and the Usercred method, but it did not work. I am posting the 32MB bios password locked.
    Model: HP EliteBook 840 G5
    S/N: 5CG85237RD
    post full name and model, motherboard model, product number,etc.

    Leave a comment:


  • peste
    commented on 's reply
    post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

  • iaf86
    replied
    Hi, experts. I have an HP Elitebook 840 G5 with a locked bios password. Is there a method to remove the password without an EC chip? I can successfully remove passwords using patchers and RC unlockers, but I'd like to learn how to remove passwords using the main bios chip. I tried the HP unlocker, which created the unlock file but did not work. I attempted to delete the bios password manually using Hex editor and the Usercred method, but it did not work. I am posting the 32MB bios password locked.
    Model: HP EliteBook 840 G5
    S/N: 5CG85237RD
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • winix
    replied
    Originally posted by Stefan Steff

    That dumps worked for me on several 840 G5 laptops.
    First , you must check all components near the EC and BIOS chips to ensure you have not blow out any little resistor and second sometimes it takes a long time to boot for the first time after flashing both EC and BIOS and I mean even up to 5-10 minutes with several restarts.

    Click image for larger version Name:	EC.jpg Views:	0 Size:	501.5 KB ID:	3695808 Click image for larger version Name:	BIOS.jpg Views:	0 Size:	203.6 KB ID:	3695809
    Thank you sir, I will give it a try again sir

    Leave a comment:


  • Stefan Steff
    replied
    Originally posted by winix
    Thank you so much for your swift response. I appreciate it so much.
    So after flash the EC & Bios you provide, I get a steady white light with 11 amber then 6 amber blinking then restart.
    Please kindly help me in anyway you can. Thank you
    That dumps worked for me on several 840 G5 laptops.
    First , you must check all components near the EC and BIOS chips to ensure you have not blow out any little resistor and second sometimes it takes a long time to boot for the first time after flashing both EC and BIOS and I mean even up to 5-10 minutes with several restarts.

    Click image for larger version  Name:	EC.jpg Views:	0 Size:	501.5 KB ID:	3695808 Click image for larger version  Name:	BIOS.jpg Views:	0 Size:	203.6 KB ID:	3695809

    Leave a comment:


  • winix
    replied
    Thank you so much for your swift response. I appreciate it so much.
    So after flash the EC & Bios you provide, I get a steady white light with 11 amber then 6 amber blinking then restart.
    Please kindly help me in anyway you can. Thank you

    Leave a comment:


  • Stefan Steff
    replied
    Originally posted by winix
    Please I need help with my bios for Hp 840G5, I have programmed almost all bios file and EC file on this thread, none seems to work, I have been having different error light, some point bios corruption, and other bios and EC mismatch. Please help me with a working file please. Here is the backup of my ec and bios file
    My laptop is
    Hp Elitebook 840 G5
    Core i5 8th generation
    Model: HSN-113C-4
    ProdID: 5JM99EC#ABH
    SN: 5CG9062P70

    Your provided serial does not match any of the dumps provided...in fact the two dumps are from different laptops...anyways,
    here you got two dumps (EC+BIOS) but you need to use BCU tool to enter factory data ... from your provided bios content is this:

    Description: HP EliteBook 840 G5
    Serial Number: 5CG8180LLR
    Product Number: 2FA66AV
    Board CT Number: PGWHT00WBAR2GG
    BuildId(BID): 17WWCSAT601#SABH#DABH
    Feature Byte: 3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfAgdhKhk.hy
    MAC Address: B4-B6-86-8C-A2-6F

    Good Luck!
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • winix
    replied
    Please I need help with my bios for Hp 840G5, I have programmed almost all bios file and EC file on this thread, none seems to work, I have been having different error light, some point bios corruption, and other bios and EC mismatch. Please help me with a working file please. Here is the backup of my ec and bios file
    My laptop is
    Hp Elitebook 840 G5
    Core i5 8th generation
    Model: HSN-113C-4
    ProdID: 5JM99EC#ABH
    SN: 5CG9062P70


    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • han19977
    replied
    hello guys, i have an issue with my 840 g5, its not detecting SSD, i did everything, i changed ssd, even i replaced ssd jack too, i checked all pins of ssd jack, and getting proper volts and signals, i think its bios issue,
    also i tried to update bios from bios menu, its saying "Bitlocker drive encryption (BDE) is enabled on your system using TPM security", i think its bios issue, could anyone help me please
    SN#5CG82302YN
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • AHSAN TARIQ
    replied
    Originally posted by Zillions Tech

    Not work, thank you
    comes up no display
    yet diplay then ty ths endpoint eror solve
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • AHSAN TARIQ
    replied
    Originally posted by Zillions Tech

    Not work, thank you
    comes up no display
    YOUR PREVIOUS BIOS DISPLAY YET ORNOT

    Leave a comment:


  • Zillions Tech
    replied
    Originally posted by shiyab

    hi try
    Not work, thank you
    comes up no display

    Leave a comment:


  • SMDFlea
    commented on 's reply
    Try the Endpoint patcher - https://www.badcaps.net/forum/troubl...security-error

  • shiyab
    replied
    Originally posted by Zillions Tech
    I have Hp Elitebook 840 g5 it turns normally but shows an error message "END POINT SECURITY CONTROLLER PROBLEM"
    Please some should help me remove the end point error, i will attach the main and ec bin here
    S/N: 5CG038BBNM
    MODEL: Hp Elitebook 840 G5
    P/N: 6050A2945601-MB-A01
    hi try
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:


  • Zillions Tech
    replied
    I have Hp Elitebook 840 g5 it turns normally but shows an error message "END POINT SECURITY CONTROLLER PROBLEM"
    Please some should help me remove the end point error, i will attach the main and ec bin here
    S/N: 5CG038BBNM
    MODEL: Hp Elitebook 840 G5
    P/N: 6050A2945601-MB-A01
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Leave a comment:

Related Topics

Collapse

  • Wutru
    HP Elitebook 820 G4 BIOS repair assistance required
    by Wutru
    Hi guys,

    If someone would be able to provide some expertise, I'd be very grateful.

    BIOS Corruption - Cause
    So I managed to corrupt my machine by installing linux and enrolling custom secure boot keys. I did choose to enroll the Microsoft keys as well, to prevent any potential bricking due to 3rd party drivers from HP being signed with those keys.
    After doing that, and rebooting(it did boot, powerLED, fanspin etc.), the laptop did not give any video output on the LCD or video connectors. I think I was able to get in BIOS and trigger the beeper by pressing ESC....
    09-06-2025, 10:32 AM
  • STKR123
    The right BIOS Programmer - The right software (HP Elitebook 820 G1, 840 G2) no soldering, EC, DMI, ME
    by STKR123
    Greetings badcaps community,

    I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
    So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.

    Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.

    I have a Elitebook 820 G1 and a Elitebook 840 G2 here.

    These ask for a password when entering the BIOS, but boot just fine from the internal SSD.

    I learned that desoldering...
    10-29-2024, 06:03 AM
  • macabook
    🛠️ MSI GP75 Leopard MS-17E71 – No Display, Deep BIOS/EC Troubleshooting
    by macabook
    Hello everyone,

    I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
    🧩 Initial Issue
    • Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
    • External display (HDMI) shows
    ...
    07-24-2025, 02:17 PM
  • Guest
    Elitebook 850 G5 BIOS bricked
    by Guest
    Hello,

    I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.

    I assume the BIOS update failed, so I searched for the BIOS chip.

    I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.

    However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.

    Can the corrupted...
    03-24-2025, 01:21 AM
  • cr4zychriss
    [Problem/ Request] Bricked TongFang GK7MRFR BIOS
    by cr4zychriss
    Hello everyone,
    I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
    I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details
    • Barebone / Chassis: TongFang GK7MRFR
    • MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
    • Rebrand: PC Specialist
    ...
    11-14-2025, 04:04 PM
  • Loading...
  • No more items.
Working...