NEED BIOS FOR HP EliteBook 840 G5 6050a2945601-mb-a01

[hoaca388]

Have code the bios with this file....But it showing HP Endpoint Security controller Problem
Please help me to get rid Problem

HP Endpoint Security

[Ismail-U50]

The main bios file is corrupted, not the EC.

Have code the bios with this file....But it showing HP Endpoint Security controller Problem
Please help me to get rid Problem

[hoaca388]

Here is New Read file attached down.

The main bios file is corrupted, not the EC.

[Ismail-U50]

Here is New Read file attached down.

[hoaca388]

Please this motherboard didn't start when i plugin the charger....it will blinking orange and white continuously
But I'm suspecting the EC file... Here is the attached file down
Hp 840 g5
Board number:COMPUTRO-6050A2945601-MB-A01(A1)
SN/ 5CG9056T3N
ProID/ 5SG12UP

Reread chip again , main bios file's corrupted.

[SMDFlea]

Thread merged.

[Ismail-U50]

Please this motherboard didn't start when i plugin the charger....it will blinking orange and white continuously
But I'm suspecting the EC file... Here is the attached file down
Hp 840 g5
Board number:COMPUTRO-6050A2945601-MB-A01(A1)
SN/ 5CG9056T3N
ProID/ 5SG12UP

[hoaca388]

hello guys, i am a bit late but i had no time.
can somebodz please help me remove the password from thi bios.
hp 840 g5 serial 5cg9135rn9 i have both ec and main bios dumps
thank you

Unlocked

[JasiqiLabeat]

hello guys, i am a bit late but i had no time.
can somebodz please help me remove the password from thi bios.
hp 840 g5 serial 5cg9135rn9 i have both ec and main bios dumps
thank you

[shaddy254]

Serial number ? https://www.badcaps.net/forum/troubl...before-posting

SORRY
5CG8510F8S

[SMDFlea]

Hello team. I have this bios for
Hp 840 g5
Hp 840 G5 COMPUTRO-6050A2945601-MB-A01(A1)
Everything working okay but it has late display (like 30 seconds) with Security endpoint error.
Please assist fixing it

Serial number ? https://www.badcaps.net/forum/troubl...before-posting

[shaddy254]

Hello team. I have this bios for
Hp 840 g5
Hp 840 G5 COMPUTRO-6050A2945601-MB-A01(A1)
Everything working okay but it has late display (like 30 seconds) with Security endpoint error.
Please assist fixing it

[SMDFlea]

post the main bios

[JasiqiLabeat]

try..

NO ITS NOT WORKING; STILL THE SAME BIOS LOCK

[peste]

hello guys i have a hp 840 g5 serial 5cg9135rn9, with bios lock.
i hope somebody here could help me.
here is the ec bios dump
thank you

try..

[JasiqiLabeat]

hello guys i have a hp 840 g5 serial 5cg9135rn9, with bios lock.
i hope somebody here could help me.
here is the ec bios dump
thank you

[Blaze Tech]

Hello, hopefully someone can help me with my problem.
I own a HP Model: HP 840 G5, Product ID: 2FA64AV, Serial Number: 5CG9020Z5Q and I have a problem where as soon as I turn it on, I get a Power button light, I can hear the fans spinning at full speed but I got no screen.
I have read on the forum that this problem could well be a BIOS problem.
I have tried a few of the posts with BIOS files attached, post #318, shuttle av11 - 2700 uF - solution please
My CHIP is an MX25L25673GZ41-08
The only BIOS reading tool that I have is a CH341A MiniProgrammer & I soldered some small wires in every contact of the chip, 8 in total.
I have attached the Original BIOS.

If it makes any sense for you, can you check if my BIOS has any errors?
Can I flash this BIOS with my current tool, do I need another software/hardware?
My skills are almost 0% on BIOS recovering so I hope I can get some feedback.
Thanks in advance!

try this file

[Technosoft]

Hello, hopefully someone can help me with my problem.
I own a HP Model: HP 840 G5, Product ID: 2FA64AV, Serial Number: 5CG9020Z5Q and I have a problem where as soon as I turn it on, I get a Power button light, I can hear the fans spinning at full speed but I got no screen.
I have read on the forum that this problem could well be a BIOS problem.
I have tried a few of the posts with BIOS files attached, post #318, shuttle av11 - 2700 uF - solution please
My CHIP is an MX25L25673GZ41-08
The only BIOS reading tool that I have is a CH341A MiniProgrammer & I soldered some small wires in every contact of the chip, 8 in total.
I have attached the Original BIOS.

If it makes any sense for you, can you check if my BIOS has any errors?
Can I flash this BIOS with my current tool, do I need another software/hardware?
My skills are almost 0% on BIOS recovering so I hope I can get some feedback.
Thanks in advance!

[3liMohmammad]

hi try flash 16 bmb

Thank you
The password was removed

[shiyab]

Thank you
There are the both files

hi try flash 16 bmb