Need LA-E991P Rev 1.0 (A00) Bios.

[ProSis]

I could not get an image in the bios I found or I had the following problems. I would appreciate if anyone can help with this. Thanks already.



When the device displays an image, it displays as "manufacturing mode on alt + F".

When I switch to normal mode with Alt + F, the image disappears and does not return.

When I enter and save the "service tag" information by logging into the bios, it does not display any more and it turns off after a few seconds, pulling around 1.10A.

Org Backup

[peste]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

I could not get an image in the bios I found or I had the following problems. I would appreciate if anyone can help with this. Thanks already.



When the device displays an image, it displays as "manufacturing mode on alt + F".

When I switch to normal mode with Alt + F, the image disappears and does not return.

When I enter and save the "service tag" information by logging into the bios, it does not display any more and it turns off after a few seconds, pulling around 1.10A.

Org Backup

post the full name and model of the laptop.

[ProSis]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

post the full name and model of the laptop.

Inspiron 15 Gaming 7577

P72F001

[peste]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

Inspiron 15 Gaming 7577

P72F001

try..

[ProSis]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

try..

I took an image with this file.
There is only a problem like this, when I first plug in the adapter and turn it on, the image appears. As long as the adapter is plugged in there is a picture every time.
but when I unplug the adapter and plug it in, I start it at around 1.30A and it shuts down.
When I remove the bios battery and plug in the adapter again, the image comes out, and when I remove and plug the adapter, it does not come back.

[SMDFlea]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

I took an image with this file.
There is only a problem like this, when I first plug in the adapter and turn it on, the image appears. As long as the adapter is plugged in there is a picture every time.
but when I unplug the adapter and plug it in, I start it at around 1.30A and it shuts down.
When I remove the bios battery and plug in the adapter again, the image comes out, and when I remove and plug the adapter, it does not come back.

Check CMOS battery voltage

[ProSis]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

Check CMOS battery voltage

I just plugged in the situation is the same. When the adapter is disconnected and attached, it does not display.

[ProSis]

Re: Need LA-E991P Rev 1.0 (A00) Bios.

Check CMOS battery voltage

I installed a new battery the situation is the same