Re: hp 6050A2728501-MB-A01 bios
it is... post the full name and model and the original bios..
-
Re: hp 6050A2728501-MB-A01 bios
Hello everybody,
i have a HP 850 G3 with bricked Bios
is it possible to flash a new Bios with a programmer?
The Chips are a WINBOND 25Q128FVPQ and 25Q64FVIQ
do you need other Infomation?Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
Post your old bios, it is needed to rebuild new one.Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
i need bios work
hp elitebook 840 g3Attached FilesLeave a comment:
-
-
Re: hp 6050A2728501-MB-A01 bios
Hello. I have a HP elitebook 850 G3 with AMD discrete graphics. Motherboard is hp 6050A2728501-MB-A01. The issue is no display, fans are spinning. I got a HP 840 G3 uma bin file , its worked well just, no discrete graphics option.
I have the original bin files , can anybody repair it for me?Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
Please can you help me, I need BIOS + EC bin file for this model.
HP 840 G3 6050A2728501-MB-A01 .Leave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
thnaks lapfix laptop working fineLeave a comment:
-
Re: hp 6050A2728501-MB-A01 bios
i's another issue , be sure of your screen cable , see if there's any corrusion or something like that ...take measurements from lvds connector and post it here : https://www.badcaps.net/forum/forumdisplay.php?f=23Leave a comment:
-
-
Re: hp bios
what is written on the case, not on the motherboard, and the original bios ..the model on the case..Leave a comment:
-
Re: hp bios
i dont have full name i have juste model for motherboardLeave a comment:
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
This laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once... -
Hi,
I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.
It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.
I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...11-06-2022, 05:22 PM -
Hi everyone,
I'm trying to recover a Fujitsu Lifebook E5513 (most likely 2023 model) that was bricked during a BIOS update. The update was interrupted (probably due to power loss), and now the laptop is stuck in a boot loop showing "PBB rollback" / "SBB rollback" messages.
BIOS access (F2) and Boot Menu (F12) are no longer possible – the system instantly reboots after the rollback messages.
I extracted the official BIOS update package from Fujitsu (contains FJNB2FD.CAP, ~18.7 MB) and tried tools like UEFIExtract, but it seems to only contain...
Leave a comment: