hp 6050A2728501-MB-A01 bios
Collapse
X
-
Good Day to all,
Please clear my bios password
HP Elitebook 840 G3 i5
ProdID: L3C64AV
SN#: 5CG7172RNN
TIA...Attached FilesBadcaps Electronics Repair Forum & Schematic SearchLeave a comment:
-
RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting
BIOS guides, methods, resources and tools
https://www.badcaps.net/forum/troubl...rces-and-tools
Leave a comment:
-
Hello Please help me to remove Bios Password
HP EliteBook 840 G3
ProdID: L3C64AV
SN#: 5CG7172RNN
Backup Bios File https://www.mediafire.com/file/p17qk...40+G3.bin/fileLeave a comment:
-
-
plsss fix this bios stay blinking 5 times
​6050A2728501-MB-A01
sn 5CG6220ZZ8Attached FilesLeave a comment:
-
try this . original read from working laptopLeave a comment:
-
Leave a comment:
-
my laptop no have a serial number full scrack
forgot to upload main bios , attaching mainAttached FilesLeave a comment:
-
Thread merged, read the rules, post the laptop serial number https://www.badcaps.net/forum/troubl...before-posting
​Leave a comment:
-
I need bios for 840 g3
6050A2728501-MB-A01
attaching old dumbAttached FilesLeave a comment:
-
[QUOTE=Blaze Tech;n3500202]Originally posted by madushanka 1234any one?? help[/QUOT
TRYLeave a comment:
-
[QUOTE=jermac0711;n3502642]Please rebuild my bios for 6050A2728501-MB-A01
Model HP ELITEBOOK 840 G3
S/N TCCANS101CEH3G0BKHE
Issue: black screen.
Leave a comment:
-
[QUOTE=madushanka 1234;n3500196]any one?? help[/QUOT
TRYAttached FilesLast edited by Blaze Tech; 11-05-2024, 02:12 AM.Leave a comment:
-
THIS IS MY OLD DUMPAttached FilesLeave a comment:
-
HP ELITEBOOK 840 G3
NO DISPLAY...
ANY ONE CAN GIVE BIOS FILE ??OR BUILD OR CLEAN MY FILE?
SERIAL NO 5CG6202KWXLeave a comment:
-
-
sir i tried it but only 2 blinking lights only i was usiang different bios ic because i dont want the original bios ic to be erase but when im trying to flash the new ic with the file with password its not working also do i really need to flash it in the original bios ic?
Are your soldering skills good ?
Leave a comment:
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by CityminHi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...-
Channel: BIOS Requests ONLY!
-
-
by DynaxSCHi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
by MDSIHello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...-
Channel: BIOS Requests ONLY!
-
-
by grimacelordThis laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Leave a comment: