hello, i've edit my post for sn
since i've tried to flash bios after hpunlocker , with ch341a 1.18 and asprogrammer but they say me that the lenght of my files is too high (as the original dump too now). 1.30 of ch341a didn't notice that.
how can i fix this problem please? can you create a validate bios with the file i sent ? thank you sir
hello, i've edit my post for sn
since i've tried to flash bios after hpunlocker , with ch341a 1.18 and asprogrammer but they say me that the lenght of my files is too high (as the original dump too now). 1.30 of ch341a didn't notice that.
how can i fix this problem please? can you create a validate bios with the file i sent ? thank you sir
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
hello
try your file but got same issues as all my files : white steady power led and blinking amber light, no post , no fan.
it is possible to create a new bios file from a known good one and my sn ?
some ,news, i finally fix the laptop : take a bios file in this topic and replace the specific data of mine with the file you send (sn, sku, build) with HxD
now all works fine
thank you for help
Hello guys i have Hp PROBOOK 650 G1,this laptop has bios password.I read the bios with ch341 v1.18 also i am using a clip.The ch341 software detected the chip like w25q128bv ,the bios chip in the motherboard has code w25q128fv. I read the bios and verified the bios without a problem,also i made 2 backups of the original bios.I used "rcunlocker" to remove the bios password .I flashed the unlocked bios from rcunlocker and turned laptop on,still had a password on it,i tried several time but no success .Then when i did the last flash the laptop doesn't power on ,only power button light up and nothing else.I flashed again the original bios and still the laptop doesnt power on ,only power buton lights up.I dont know where the problems is ,or what mistake i have done .
Can someone help ?
Serial:5CG61840YD
Product9S33AV
PCID:A3009DD10203
Thanks!
Hello guys i have Hp PROBOOK 650 G1,this laptop has bios password.I read the bios with ch341 v1.18 also i am using a clip.The ch341 software detected the chip like w25q128bv ,the bios chip in the motherboard has code w25q128fv. I read the bios and verified the bios without a problem,also i made 2 backups of the original bios.I used "rcunlocker" to remove the bios password .I flashed the unlocked bios from rcunlocker and turned laptop on,still had a password on it,i tried several time but no success .Then when i did the last flash the laptop doesn't power on ,only power button light up and nothing else.I flashed again the original bios and still the laptop doesnt power on ,only power buton lights up.I dont know where the problems is ,or what mistake i have done .
Can someone help ?
Serial:5CG61840YD
Product9S33AV
PCID:A3009DD10203
Thanks!
Look around the bios chip pins to see if you have accidentally damaged your machine.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Look around the bios chip pins to see if you have accidentally damaged your machine.
I just checked and it looks good ,the bios chip legs look connected in the board ,they have some scracht from clip but no other damage.Also white steady power led and blinking amber light, no post , no fan spinning .Maybe the bios file is damaged or idk 😔.I think i have the same problem like Disorder user .
I just checked and it looks good ,the bios chip legs look connected in the board ,they have some scracht from clip but no other damage.Also white steady power led and blinking amber light, no post , no fan spinning .Maybe the bios file is damaged or idk 😔.I think i have the same problem like Disorder user .
Replace the bios chip (if you are sure there is no further hardware damage).
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
Replace the bios chip (if you are sure there is no further hardware damage).
Finally i was able to flash the original bios and laptop comes to life ,but still the admin bios password is there ,can you remove the password please?I tried with rcunlocker but didnt work ,idk why .
Comment