does not work, as soon as I connect the power supply, the poweron LED lights up, after 15 seconds the LED turns off and the fan starts to turn at maximum and remains so until power is disconnected.
unfortunately this also does not work, it turns on by itself with the LED on and fan on, I tried other bios but gave no signs of life, can it be a micro-ec problem?
If you write a new bios on this mobo, it usually turns on automatically and fan does spins at max speed and it will restart a couple of times(i think 3 cycles) and then display comes. the screen has to be attached to boot. Did you waited that long??
good morning, I waited 4 or 5 min but the fan always runs, I have not connected the display, now I will try again with the display connected and the ram and let me know if it works
I left the notebook on with the fan at the most and after 2 hours it is still running, I think it's a little too long, the chip is recognized by the programmer so I think it's good, I tried a bios and with this the LED had no white light but amber however the fan did not start but only the led was on
with this last bios connecting the power supply, the power led lights up for 3 sec then turns off, but the fan remains still and if I press the power button nothing happens, like it did at the beginning when I opened it the first time with the original bios,so i think this may be the original bios
Comment