workin dump
-
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
thank -
Re: je70-cp mb 09923-1m 48.4hn01.01m
thanks a lot...Comment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
thanksComment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
thanksComment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
ThanksComment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
big thanks!Comment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
Thank you !Last edited by SMDFlea; 07-31-2021, 07:02 AM.Comment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
thank youComment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
Thanks so much!Comment
-
Re: je70-cp mb 09923-1m 48.4hn01.01m
thanks alot brother great jobComment
-
thank you buddy
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Hi everyone,
I'm working on removing an administrative BIOS lock (Supervisor/Admin Password) on a laptop.
The board has three SPI flash chips:
- W25Q64FV (main BIOS)
- W25Q32FV (EC/TPM)
- W25X10CL (configuration)
I was able to read the dump from the W25Q64FV chip, CRC32 = 0x3DE23E27.
The dump contains protection that needs to be removed.
If anyone has a clean or unlocked BIOS dump for W25Q64FV, I’d really appreciate it!
I’m also happy to share my dump for comparison if needed.
Laptop model: [please specify, e.g....
Comment