Need bios hp probook 430 G4
Need bios for
hp probook 430 G4 bios dump
DA0X81MB6E0
REV:E
thanks
hp probook 430 G4 bios dump
DA0X81MB6E0
REV:E
thanks
-
Last edited by Siddig; 05-29-2018, 05:19 AM. -
Re: Need bios hp probook 430 G4
Please I need above bios dump -
Re: Need bios hp probook 430 G4
you got itComment
-
Re: Need bios hp probook 430 G4
ThanksComment
-
Re: Need bios hp probook 430 G4
Hi, I would need the password removed from those 2 bios files which are from a HP ProBook 430 G4.
Is there a guide for removing the password? I have another 6 430 G4 where I need the password removed. So I would not want to overstress the community with all those request and do it on my own.
Thanks!Comment
-
Re: Need bios hp probook 430 G4
hi all need help for password reset
hp 430 g4
HP Notebook System BIOS Update (P85, P91) 01.32 Rev.A
.thanks in advanceComment
-
Re: Need bios hp probook 430 G4
Thank broComment
-
Re: Need bios hp probook 430 G4
Need bios for
430 G4 bios dump
DA0X81MB6E0
REV:E
or remove psw
thxComment
-
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: HP Probook 440 G4 Working BIOS
Hi, I have a DA0X81MB6E0 REV: E MODEL X81, after liquid damage the machine wouldn't turn on. After clean and repair the machine powers with kb backlight and CAPS&NUM Lock blinking 5 times, black screen.
I suspect it to be bios related. Would someone have a look at my dump file?
Thank you.Comment
-
Re: HP Probook 440 G4 Working BIOS
Anyone?Comment
-
Comment
-
Re: Need bios hp probook 430 G4
I followed the instructions and rebuilt the ME Region on my original dump.
I found that my bios ME Version is 11.6.1.1142, and using this link:
"https://www.win-raid.com/t832f39-Intel-CS-ME-CS-TXE-CS-SPS-GSC-PMC-PCHC-PHY-amp-OROM-Firmware-Repositories.html"
I downloaded the correspondent version zip, in my case this file:
"https://mega.nz/folder/PJFXnCDK#lWSX5W0ODubZ2pf3gu3unw"
And I chose "CSME 11.6 Repository r32\11.6.1.1142_CON_LP_C_NPDM_PRD_RGN.bin" file, as it seemed to be the most identical file by the name abbreviations (Consumer LP, SPT/KBP-LP C)
I changed its name to "ME Region.bin" and overwritten the file inside Decomp, in the Intel FIT folder. Built the image, pressing ok in any option ahead.
ME analyzer is now saying the file is "configured" instead of "initialized", so I am to suppose that the ME Region has been fixed properly. But after flash, I get the exact same result, 5 caps&num blinks with a black screen, followed by fast fan spin.
Would you please confirm for me if this file is properly set?
Original - original dump
ME file - file used to fix me region
ME fixed - final image created
Thank you for your support.Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”...
Comment