Clevo 6-71-W65S0-D02 need bios dump
Clevo 6-71-W65S0-D02 need Bios
Collapse
X
-
-
Re: Clevo 6-71-W65S0-D02 need Bios
Comment
-
Re: Clevo 6-71-W65S0-D02 need Bios
Log into the palkeo site linked above using
Username: repo
Password: repo
Download bios version B0304.zip ,extract the folder.The update has a 4MB bios and 6MB,so the 6MB needs splitting to 2 and 4. Open W650SB.6M with a hex editor https://mh-nexus.de/en/downloads.php?product=HxD20 ,select-block 0 - 1FFFFF (200000 in length is 2MB in hex),cut and copy into a new file and save as 2MB.bin ,then save the remaining 4MB bios.Flash both the 2 and 4MB bios .
To update the EC (E0304) copy the files from the extracted zip folder onto a bootable USB flash drive https://rufus.ie/en/ ,boot from it and run ECFLASH.batLast edited by SMDFlea; 06-10-2022, 05:16 AM. Reason: 200000 (two hundred thousand,not tweny thousand)Comment
-
Re: Clevo 6-71-W65S0-D02 need Bios
Log into the palkeo site linked above using
Username: repo
Password: repo
Download bios version B0304.zip ,extract the folder.The update has a 4MB bios and 6MB,so the 6MB needs splitting to 2 and 4. Open W650SB.6M with a hex editor https://mh-nexus.de/en/downloads.php?product=HxD20 ,select-block 0 - 1FFFFF (20000 in length is 2MB in hex),cut and copy into a new file and save as 2MB.bin ,then save the remaining 4MB bios.Flash both the 2 and 4MB bios .
To update the EC (E0304) copy the files from the extracted zip folder onto a bootable USB flash drive https://rufus.ie/en/ ,boot from it and run ECFLASH.batComment
-
Re: Clevo 6-71-W65S0-D02 need Bios
Log into the palkeo site linked above using
Username: repo
Password: repo
Download bios version B0304.zip ,extract the folder.The update has a 4MB bios and 6MB,so the 6MB needs splitting to 2 and 4. Open W650SB.6M with a hex editor https://mh-nexus.de/en/downloads.php?product=HxD20 ,select-block 0 - 1FFFFF (200000 in length is 2MB in hex),cut and copy into a new file and save as 2MB.bin ,then save the remaining 4MB bios.Flash both the 2 and 4MB bios .
To update the EC (E0304) copy the files from the extracted zip folder onto a bootable USB flash drive https://rufus.ie/en/ ,boot from it and run ECFLASH.bat
Thank you workingComment
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by DynaxSCHi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
by FedorovVMSI Alpha 15 B5EEK-237XRU SN:K2209N0193161
Came without initialization. Before that, it was not under repair. With BIOS from the official website, there is a start Ok, after a while the fans gain speed and the laptop turns off.
The cooling system is cleaned, the contact spot is good.
I need a working dump from laptop to check.
This is an original, not working dump....-
Channel: BIOS Requests ONLY!
03-10-2024, 07:26 PM -
-
by DynaxSCHi,
I need a BIOS dump for MSI Z590 PRO WIFI from a real physical board, along with MAC address and serial no.
It must be a dump from a physical board, as it contains personalized data eg. MAC Address, UUID, Serial no.
I have a board which has lost the BIOS contents, I have the MAC and serial to this board, and need to insert it into the another BIOS image. To do it, I need to have a real image from a real board, as the images from the MSI site are without this data. The only way to find where MAC/UUID/Serial is located in the BIOS is to have a bios...-
Channel: BIOS & Schematic Requests!
11-06-2022, 05:22 PM -
-
by zPwN!Corrupted BIOS (no WIFI, graphics drivers crashing, USB port reset request failed, etc)
Working BIOS (taken from 15.0.41.2158_CON_LP_B_PRD_EXTR_AB7F54AC but I fixed some FLEX I/O for sata ssd and GPIO VCCIO config for this model)
System SKU NE14I310
BIOS Version APD-BI-14-XU133TR130-TA60F-143-E ?
Motherboard XU133T rev 1.3
Serial Number IPNBI3X240SM2A01095
Processor 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz 3.00 GHz
RAM 8.00 GB
NOTE: I'm new repairing and not sure if this is everything that needed to be configured, but the BIOS...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment