ENOVA NE14I310 XU133t rev 1.3 working BIOS

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • zPwN!
    gordo kko
    • Dec 2024
    • 5
    • Argentina

    #1

    ENOVA NE14I310 XU133t rev 1.3 working BIOS

    Corrupted BIOS (no WIFI, graphics drivers crashing, USB port reset request failed, etc)
    Working BIOS (taken from 15.0.41.2158_CON_LP_B_PRD_EXTR_AB7F54AC but I fixed some FLEX I/O for sata ssd and GPIO VCCIO config for this model)

    System SKU NE14I310
    BIOS Version APD-BI-14-XU133TR130-TA60F-143-E ?
    Motherboard XU133T rev 1.3
    Serial Number IPNBI3X240SM2A01095
    Processor 11th Gen Intel(R) Core(TM) i3-1115G4 @ 3.00GHz 3.00 GHz
    RAM 8.00 GB

    NOTE: I'm new repairing and not sure if this is everything that needed to be configured, but the BIOS is working 100%. I tried with 15.0.41.2158_CON_LP_B_PRD_EXTR_AB7F54AC and 15.0.41.2158_CON_LP_B_PRD_EXTR_74393372, but it didn´t work because of the different hardware setup, so I had to reconfigure it with Flash Image Tool. Now, it is 100% working, but if anyone has the original BIOS, please share it. Thanks.
    Attached Files
  • SoporteNetFe
    Senior Member
    • Aug 2021
    • 98
    • Argentina

    #2
    See this post

    https://www.badcaps.net/forum/troubl...xu133t-rev-1-3

    Comment

    Related Topics

    Collapse

    • Vesko356
      [Guide] How to find the right HP bios version to flash
      by Vesko356
      First of all thanks to all of our members who have posted previously all methods posted here.
      Please leave a comment if you find something new,or have anything else to add.
      -----------------------------------------------------------------------------------------

      Find by serial number,model number or series

      If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
      Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
      Operating system and OS version.If...
      08-11-2023, 03:27 AM
    • zenius
      [REQUEST] Dell G3 3579 BIOS Password & AMI Protected Range/BIOS Guard Unlock
      by zenius
      Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.

      Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
      12-08-2024, 06:13 AM
    • Sparklingx
      CH341 disconnects, test clamp not working, soldered bios chip but not erasing/writing how I fixed
      by Sparklingx
      Hi,
      So i've bough a ch341 programmer, and the chip was CH341B . the test clamp was not working( when connecting bios using test clamp, ch341 device was disconnecting) I tried soldering the bios on the provided board, soldering the bios I could read the chip but could not write or erase. ASprogrammer , neo, ch341a programmer... all programmer software was hanging and device was disconnecting after few second of erase/write operating.
      So then I have soldered a capacitor(whatever I had..[10v ~470uf ] ) from VCC to GND on my provided pcb where you solder the bios

      now all...
      08-29-2024, 01:53 PM
    • Bloodhoundje
      HP Pavilion Gaming Laptop 15-ec2523nd - Dimm2 slot disabled after corrupt bios repair? Advice requested.
      by Bloodhoundje
      Hi everyone,

      I have been doing hardware repair as a hobby for some years now and recently decided to learn about repairing laptops as a fun challenge.

      I managed to get my hands on a "HP Pavilion Gaming 15-ec2523nd" notebook that only shows a white power LED and doesnt respond to anything.

      After initial testing I concluded the bios seems to be corrupted since all voltages are normal and there are no shorts. HP has a feature for a bios restore from USB with winkey+B for this model. This did not work.

      I have desoldered the bios chip (GigaDevice...
      03-16-2024, 03:12 PM
    • titomno2
      Acer AN515-52 SATA1 port not working no hdd detected in BIOS...
      by titomno2
      Hi guys,
      On motherboard ACER AN515-52 type LAF951P.
      I fixed issue with not starting computer (it was the PQ201 component not working properly).
      But after checking everything I have still an issue with secondary SATA connector JHD1 (for HDD typically).
      Basically some HDD spin but are not detected by the bios.



      Already tried following:
      checked the 4 data lines
      #2 RDSATA_PTX_C_DRX_P4 => CO18 (10nF seems OK) => RO24 (0Ohm measured at 0.25Ohms).
      #3 RDSATA_PTX_C_DRX_N4 => CO17 (9.68nF seems OK) => RO23 (0Ohm measured...
      07-28-2024, 08:30 AM
    • Loading...
    • No more items.
    Working...