Re: HP 840 G3 bios needed
thank you very much. it works...
thank you very much. it works...
-
-
bios dump elitebook 840 g3
Hello guys plz i need bios dump for elitebook 840 g3
Motherboard: 6050A2728501-MB-A01
and another one
Motherboard: 6050A2822301-MB-A01
Thank youComment
-
Re: bios dump elitebook 840 g3
You have a old bios post here i try build new.Comment
-
Re: bios dump elitebook 840 g3
Plz I have a question..
The problem of my pc elitebook 840 g3... first i have a password in bios..
second i removed the EC bios chip and I started the computer without EC bios..
Result : no display
next i replace the EC BIOS chip
Same result no display.
Note: I did nothing only remove and replace the EC bios.
what exactly is the problem???
Thank you very much.Comment
-
Re: bios dump elitebook 840 g3
ok i give you a dump in few hour but my qustion why I have not a display??Comment
-
Re: bios dump elitebook 840 g3
and i can get a dump with raspberry pi2??Comment
-
Re: bios dump elitebook 840 g3
Sorry I don't use this.Comment
-
Re: bios dump elitebook 840 g3
THAIS
HP EliteBook 840 G3_6050A2728501-MB-A01
Comment
-
Re: bios dump elitebook 840 g3
HP EliteBook 840 G3 6050a2822301-mb-a01Comment
-
Re: bios dump elitebook 840 g3
Thank you very much ddhlawi for the dump but i need the EC bios dump too if you have...?Comment
-
Re: bios dump elitebook 840 g3
Hello. Unable to unpack the archive from post ddhlawi. I need a dump of EC & MAIN.Comment
-
Re: bios dump elitebook 840 g3
PLZZZ i need help
i need dump of EC and MAIN bios for elitebook 840 g3
Motherboard: 6050A2728501-MB-A01
and
Motherboard: 6050A2822301-MB-A01
thanks you...Comment
-
Re: bios dump elitebook 840 g3
what revision on bios do you need for 6050A2728501-MB-A01 ?Comment
-
Re: bios dump elitebook 840 g3
thank you very much kronnos i check now and i reply
Comment
-
Re: bios dump elitebook 840 g3
Kronnos same problem no display!!!Comment
-
Re: I need a bios and ec dump for 840 G3
hi , can you help me removing the bios password from my dump file please?Last edited by SMDFlea; 04-02-2023, 12:22 PM.Comment
-
Re: I need a bios and ec dump for 840 G3
any one pleaseComment
-
-
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I have an MSI PRO B660M-G DDR4 board with damaged BIOS and i need a bios dump from a real board, along with MAC, UUID and Serial Number info (eg. a BIOS screenshot and pictures from the board stickers).
I need to reconstruct the bios on my board, based on another bios image form a real board - meaning a bios image containing MAC address, UUID and Serial number. A stock BIOS is not suffiecient, as it is impossible to discover where the MAC, UUID and SerialNumber are stored. Tried with a similar board, but there are too much differences, and the stock BIOS is missing a lot of...11-17-2023, 10:56 AM -
Can you help me upload Bios dump from HP EliteBook 845 G8 with AMD CPU and Touchscreen please 🤝 -
Hello,
I have an EliteBook 850 G5. After a Windows update, including a BIOS update, the notebook turns on, but the screen remains black, and the fans spin at high speed—nothing else happens.
I assume the BIOS update failed, so I searched for the BIOS chip.
I found a Winbond chip located between the RAM and the hard drive, which has a size of 32 MB.
However, the BIOS update available on HP's website is only 17 MB in size. I used the update version that was previously installed when the notebook was still working.
Can the corrupted... -
Hello,
I'm requesting a full BIOS dump (including EC firmware) for an HP OMEN 17-an012nf laptop.
Details:
Model : HP OMEN 17-an012nf
Motherboard Part Number : DAG3BAMBAF0 REV : F
Serial Number (S/N) : 5CD7280D51
BIOS chip : Winbond W25Q64VSIQ
Programmer : EZP2023+
Issue : The motherboard is not powering on. Only the 5V rail is present. The 3.3V rail is missing because EN1 on the SY8286B remains stuck at 0V. This signal is driven directly by the EC/SIO. I replaced the 3.3V regulator and confirmed it's working.
I already...
Comment