macbook pro a1278 password

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • smali
    Badcaps Veteran
    • Sep 2014
    • 288
    • Pakistan

    #1

    macbook pro a1278 password

    @ala_brobe
    As per PM the below two dump files are one original with pass and the other edited by me for unlocking.
    as per my edited file have no display and the original have ok but password please check and help to solve the problem.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

  • ala_borbe
    aka Donald
    • Apr 2011
    • 1625
    • Malta

    #2
    Re: macbook pro a1278 password

    try this and pls report back
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Im Back... sort of...

    Comment

    • smali
      Badcaps Veteran
      • Sep 2014
      • 288
      • Pakistan

      #3
      Re: macbook pro a1278 password

      Originally posted by ala_borbe
      try this and pls report back
      thanks for reply but i write the original file on another blank winbond chip 25q64fvs(8mb).it does not work. no display..original chip number 25q064a..13e40,,,,,is there any difference between these chip,,,or there is somthing else problem?.becuz i dont want to disturb the original chip memory before confirmation....i tried 2 different working blank chip with original dump (with password) but same no display.
      Last edited by smali; 11-22-2016, 12:00 PM.

      Comment

      • ala_borbe
        aka Donald
        • Apr 2011
        • 1625
        • Malta

        #4
        Re: macbook pro a1278 password

        on some platform eproms must be identical

        you have backup of rom, you can do whatever you like with it, and then write backup back if needed
        Im Back... sort of...

        Comment

        • smali
          Badcaps Veteran
          • Sep 2014
          • 288
          • Pakistan

          #5
          Re: macbook pro a1278 password

          Originally posted by ala_borbe
          on some platform eproms must be identical

          you have backup of rom, you can do whatever you like with it, and then write backup back if needed
          You are right sir but i write backup rom (non edited) on other blank chip as number mentioned above and soldered on board but not working witk black display only power led on and fan running but when i install original chip the display comes...my cocern is why the other chip are not working with original backup..so i am hesitating writing file on original chip because i only read the original chip .
          And i check your provided file and my edited file with hexaeditor compare file option both are same...
          For your information i am using CH341 Programmer? Thanks

          Comment

          • ala_borbe
            aka Donald
            • Apr 2011
            • 1625
            • Malta

            #6
            Re: macbook pro a1278 password

            if your backup with password does not work on new chip then

            1. new chips are either bad or incompatible with the board
            2. not written as they should

            try erase, write, compare
            then read chip to file
            compare file written and file read from chip (rar or zip them both and then check crc)

            if they are the same then your chips does not work on this board
            if they are not the same, problem with chips or programmer itself

            as for password
            search $SVS and fill with 0xff for everything there (usually found two times in dump)
            and password is gone
            Last edited by ala_borbe; 11-22-2016, 01:21 PM.
            Im Back... sort of...

            Comment

            • smali
              Badcaps Veteran
              • Sep 2014
              • 288
              • Pakistan

              #7
              Re: macbook pro a1278 password

              @ala_brobe
              The problem solved.
              The problem was in dump file as i uploaded in my first post that was corrupted.
              i read the original chip again and compare with with first dump there were a lot of differences showing hexaeditor. so i save the new dump and write with on another chip..this time laptop work with other chip then i modify the new dump file for password removal and write again this time every things work fine password removed ok.
              but i dont know why the first read file was corrupted and that is my good luck that i did not disturbed the original chip till to confirmation.
              Thanks thanks for your cooperation.
              Last edited by smali; 11-24-2016, 12:31 AM.

              Comment

              • mentosmec
                Senior Member
                • Jun 2018
                • 64
                • Belgique

                #8
                Re: macbook pro a1278 password

                hello I have a macbook pro a1278 chip (25Q064A) you can help me unlock it please thank you
                Attached Files

                if you find these attachements useful please consider making a small donation to the site

                Comment

                • mentosmec
                  Senior Member
                  • Jun 2018
                  • 64
                  • Belgique

                  #9
                  Re: macbook pro a1278 password

                  serial number: C1MKG1YSDTY3

                  Comment

                  • mentosmec
                    Senior Member
                    • Jun 2018
                    • 64
                    • Belgique

                    #10
                    Re: macbook pro a1278 password

                    I found :Roche:
                    Attached Files

                    if you find these attachements useful please consider making a small donation to the site

                    Comment

                    • mentosmec
                      Senior Member
                      • Jun 2018
                      • 64
                      • Belgique

                      #11
                      Re: macbook pro a1278 password

                      Originally posted by mentosmec
                      I found :Roche:
                      it works by cons I have more the same serial number

                      Comment

                      • electronica
                        Senior Member
                        • Apr 2014
                        • 89
                        • algeria

                        #12
                        Re: macbook pro a1278 password

                        Originally posted by mentosmec
                        hello i have a macbook pro a1278 chip (25q064a) you can help me unlock it please thank you
                        here you go ; after flashing do a smsc reset.
                        Attached Files

                        if you find these attachements useful please consider making a small donation to the site

                        Comment

                        • mentosmec
                          Senior Member
                          • Jun 2018
                          • 64
                          • Belgique

                          #13
                          Re: macbook pro a1278 password

                          Originally posted by electronica
                          here you go ; after flashing do a smsc reset.
                          thank you

                          Comment

                          Related Topics

                          Collapse

                          • mferna14
                            Password removal on MacBook Pro A2159
                            by mferna14
                            Hi friends., I am working on MacBook Pro A2159 touchbar 2019. The old logic board was liquid spilled so I ordered another logic board from AE. Received it & all worked fine till I got to the Chinese login screen where the login screen password tobe entered. I tried to reset the password but it again gave me options which I do not know about the Apple ID. I formatted the onboard SSD. & wanted to change the startup boot sequence but in order to change it, again the password is needed for that too. Is there a way to get rid of this password?? The seller has not replied back past 2 days, how...
                            05-13-2025, 04:16 PM
                          • ritalo
                            MacBook Air 13 2014 - Remove EFI password
                            by ritalo
                            Hello,

                            I have a MacBook Air 13 inches 2014.

                            I have set a EFI password and I can't remember it : now I want to reinstall macOS and I can't because the MacBook is asking for the password.

                            I know how to remove the password with a usb programmer.
                            I plug the usb programmer to the motherboard and to my pc with usb, I read the EFI and I save it to a file.

                            Then I have to find this value in the file : $SVS because it indicate where is the password.

                            But I can't find the value.

                            I have attached the file​

                            Thank...
                            05-14-2024, 12:10 PM
                          • Adogabriel100
                            Macbook A1278 (820-2936) No power. missing SMC_BC_ACOK
                            by Adogabriel100
                            Hey! This is a A1278 macbook 2011.

                            Problem: Not turning on / No green light

                            Im using by3200s charger.

                            Voltajes:

                            PPBUS_G3H = 12.26v

                            SMC_RESET_L = 3.3v
                            PP3V42_G3H = 3.42v

                            U7000 =

                            Pin 1 CHGR_AGATE = 0v
                            Pin 2 CHRG_DCIN = 19v
                            Pin 3 CHRG_ACIN = 4.6v
                            Pin 10 SMBUS_SMC_BSA_SDA = 3.3V
                            Pin 11 SMBUS_SMC_BSA_SCL = 3.3V
                            Pin 12 PP3V42_G3H = 3.42v
                            Pin 13 CHRG_RST_L = 3.3V
                            Pin 14 SMC_BC_ACOK = 0.8V
                            Pin 19 PP5V1_CHRG_VDD = 5.05V
                            Pin 20 PP5V1_CHRG_VDDP = 5.03V...
                            04-01-2024, 01:02 PM
                          • Rezendes
                            Looking for 13" Macbook Pro A1278 mid 2012 820-2565-A Schematics and Board View
                            by Rezendes
                            Hello, I am looking for any and all files related to the mainboard for 820-2565-A (13" Macbook Pro A1278 mid 2012) schematics/board view.

                            I looked through forum search results and google and was unable to find a board view file, I found a pdf of all the schematics but I don't know where the parts physically are on the board as this is my first macbook board level repair attempt.

                            The macbook charger has a green light, the battery has been replaced and OS reports Normal status but Not charging. After cleaning a corroded capacitor it crumbled off the board. There...
                            05-10-2024, 02:18 PM
                          • pcbmaniac
                            MacBook A1278 (3115) No PPBUS_G3H Issue
                            by pcbmaniac
                            Subject: Help Needed: MacBook A1278 (3115) No PPBUS_G3H Issue

                            Hello everyone,

                            I'm working on a MacBook A1278 with the 3115 logic board and facing an issue with no PPBUS_G3H voltage. Here's what I've checked so far:
                            1. U7000 Measurements:
                              • Pin 3 has 0V, even though R7012 shows 16.5V from PPDCIN_S5_CHGR.
                            2. Resistors:
                              • I measured R7010 and R7011 with one leg disconnected, and both tested OK.

                            Based on these findings, I believe U7000 needs to be replaced. However, I have a related question:
                            • If I also decide to replace the SMC, do I need to order it pre-programmed,
                            ...
                            12-02-2024, 04:12 PM
                          • Loading...
                          • No more items.
                          Working...