Need Acer V5-471pg bios dump...
hi guys i need bios dump for my acer v5-471pg
Board ID: 48.4TU05.04M
thanks guys....
Board ID: 48.4TU05.04M
thanks guys....
-
-
Re: Need Acer V5-471pg bios dump...
please try it bios -
Re: Need Acer V5-471pg bios dump...
backup old bios and try thisIm Back... sort of...
Comment
-
Re: Need Acer V5-471pg bios dump...
did it work ?Comment
-
Re: Need Acer V5-471pg bios dump...
husk mb 11309-2 48 4tu05 021: its for v5-471g
I've check on acer website its look like same between v5-471g and v5-471pgAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: Need Acer V5-471pg bios dump...
does work yes
in this case was just to clean out the non possibility to enter bios , now its fixedComment
-
Re: Need Acer V5-471pg bios dump...
thanksComment
-
Re: Need Acer V5-471pg bios dump...
thankComment
-
Re: Need Acer V5-471pg bios dump...
Thank you
Comment
-
Re: Need Acer V5-471pg bios dump...
Hello guys. I am having trouble with 1 mobo. My original bios powers on for 1 second then shuts off. No post, just leds on and off. I tried flashing the bios uploaded by @meritosari but with that bios mobo is completely dead. No lights, no nothing.
Can you help me with another bin or some advice?
I have attached the backup of my original bios. Thanks!Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
-
Re: Need Acer V5-471pg bios dump...
try these two, if it does not work, see that you do not have any problems on the motherboard.Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs.Comment
-
Re: Need Acer V5-471pg bios dump...
this one workComment
-
please i need bios acer v5 - 471pg husk MB 11309-4M 48.4TU05.04MComment
-
thanksComment
-
Need acer v5-471g bios file.
It just can't boot to bios F2 or change boot F12.
I just can enter to diagnostic once it can't boot to os (unpludge).
board is:
PETRA UMA MB 11324-1 48.4VM02.001
INTEL CELERON 887 SR0VA
Here is the backupComment
-
Thread merged.Type and post the laptop serial number.Read the updated rules https://www.badcaps.net/forum/troubl...before-posting
-
thank you working good 
-
Hi,
My daughter has accidentally managed to kill her Acer gaming desktop it has a blank screen after updating and when you press the power button the fans spin, light comes on and it makes 1 long and 1 short beep and no attempt to boot.
All basic troubleshooting has been done we replaced CPU, GPU and RAM from a working machine and no joy, I also noticed a post on here with the same issue and it was the BIOS. I am pretty sure also because it was doing a BIOS update that stopped it working, she knocked the keyboard out by accident during the update and the screen just went... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hi, I need a bios dump for my Acer TMP614 (tmp614-51-g2-5442 bios dump). Thanks.
Comment