Bios Clear Password HP 15-dw3212nia gpt52 la-k201p rev 3.0

[Waly411]

Necesito quitarle la contraseña a la bios
cnd1468024
gpt52 la-k201p Rev 3.0
I need to remove the bios password
cnd1468024
gpt52 to-k201p Rev 3.0
in English please..

[Expired]

try and reply with results...

[Waly411]

When I turn on the laptop, only LED 1 lights up, and it waits 5 seconds before turning off. Nothing happens, and the fans and screen don't turn on. I correctly read, erase, program, and verify the data.

[miyagik]

Try this one and report pls.

[Waly411]

I tested it and the same problem persists. When I press the power button, the LED indicator light only comes on for 5 seconds and then turns off. Nothing else happens. I've already tried reverting to the original BIOS and the same problem.

[minhdigital]

I tested it and the same problem persists. When I press the power button, the LED indicator light only comes on for 5 seconds and then turns off. Nothing else happens. I've already tried reverting to the original BIOS and the same problem.

Send to you

[Waly411]

The same problem persists, the chip is a UC2 (XMC QH128BAHIG) it also has an EC kb9052 chip, the laptop is clean with no hardware problems, I am just carefully using the SOIC clip, the program recognizes it well, I don't know what is happening, I need help.

[peste]

The same problem persists, the chip is a UC2 (XMC QH128BAHIG) it also has an EC kb9052 chip, the laptop is clean with no hardware problems, I am just carefully using the SOIC clip, the program recognizes it well, I don't know what is happening, I need help.

write back the original contents of the bios chip and see what happens...

[Waly411]

I already tried that, it was the first file I sent in the post, it's my original BIOS, I already tried putting the original BIOS on it and the problem still persists.

[peste]

I already tried that, it was the first file I sent in the post, it's my original BIOS, I already tried putting the original BIOS on it and the problem still persists.

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..
here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow
you have everything you need at post #4...0881D...
https://www.badcaps.net/forum/troubl...os#post1799811
the bios from post #4 is virgin, use the HxD program (it's free on the internet), enter both bios into the program (your laptop and the virgin one),
select that interval mentioned in both bios, copy the interval in your bios and pass it to the virgin bios (copy - paste)....and that's it...