EZP2025 Working english program

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ToNe 36
    New Member
    • Mar 2025
    • 6
    • Romania
    #1

    EZP2025 Working english program

    Hello from Romania here I present you the working EZP2025 without using locale editor sent to me by the developer.
    It works without having to tweak it with locale emulator..
    I sent mails to the developer and he was kind enough to send me the fixed version which is not having the richedit error....
    Please save it and share it on other forums as well as the chinese man said he can not upload it on his website....strange....
    EZP 2025 works only with this version so it will not work with older versions.......
    Attached Files
    2 Photos
    Tags: None
    • jerryormeno
      New Member
      • Mar 2022
      • 1
      • Lima
      #2
      Excelente compañero gracias totales.
      Excellent partner, thank you very much.
      in English please..

        Comment

        Previous template Next

        Related Topics

        Collapse
        • MMH3
          Dell Optiplex 5050 SFF - strange behavior and service_mode jumper not working anymore
          by MMH3
          Hello,

          i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
          Never ever i experienced problems with that.

          Now i have one 5050sff machine, where this jumper isnt working at all.
          I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?

          The history of the machine is that i used it in my office...
          03-23-2025, 09:28 PM
        • DynaxSC
          GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???
          by DynaxSC
          Hi,

          I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
          There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
          The board is generally working now, all PCIe ports are working, Windows installs normally.

          However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
          The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
          03-10-2025, 12:27 PM
        • ruletero
          how to program it8987E with Vertyanov? is not working
          by ruletero
          Hi

          somebody could explain me how to program ITE8987E with Vertyanov?

          MB: DAG3DBMB8D0 REv. D

          I can detect the EC but it not show the model, next I can read and try to erase but blank check is false.

          neither I can to write, it is false, below I add the log:

          ITE mode selected
          check pins ok
          selected motherboard DAG34AMB6D0 RV 15-AU IT8987E SHAN
          CHECK GND
          Now plug power to the motherboard
          Device ID: EEEE
          Device Revision: EE
          ITE series detected
          Flash ID: EEEEEE
          ...
          06-12-2023, 09:26 PM
        • obelix24
          Macbook Air 2020 (a2179) - touch id not working
          by obelix24
          Hi i have one Macbook Air 2020 where touch ID is not working (it's not scanning fingerprints). Touch ID was working before, there is no error message during scanning fingerprint it's just not scanning on screen you can see only fingerprint but there are no red updates as when it's working. Power button is working fine.

          I've checked boardview and also schematics but i'm not able to find anything related to TouchID ... i have similar issue on a2338 where there was problem with PP3V0_TOUCHID​ and after replacing UT610 it was working but here i'm not able to find anything related to...
          02-09-2025, 12:57 PM
        • hopkok
          Lenovo Legion 16ITHg6 NM-D721, keyboard not working, LEDs too
          by hopkok
          Hi masters, I need your help.

          I am working on Lenovo Legion 16ITHg6
          Motherboard number NM-D721, no BV, no schematic but I am attaching very closes ones.

          INPORTANT: My motherboard version is with IT8258 IC, that is controlling keyboard and RGB LEDs.

          My problem is on UI142, +3VALW_AG is not stable, floating from 0V to 3,3V.
          AGKB_PWR_EN_N signal is floating too (that is why+3VALW_AG not stable).
          Power LED is not working as well, power button working well.
          UI26 ??? is there any firmware too? Powered by +3VALW_AG.

          Motherboard...
          05-04-2025, 09:35 AM
        • Loading...
        • No more items.
        Working...