EZP2025 Working english program

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ToNe 36
    New Member
    • Mar 2025
    • 6
    • Romania
    #1

    EZP2025 Working english program

    Hello from Romania here I present you the working EZP2025 without using locale editor sent to me by the developer.
    It works without having to tweak it with locale emulator..
    I sent mails to the developer and he was kind enough to send me the fixed version which is not having the richedit error....
    Please save it and share it on other forums as well as the chinese man said he can not upload it on his website....strange....
    EZP 2025 works only with this version so it will not work with older versions.......
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    2 Photos
    Tags: None
    • jerryormeno
      New Member
      • Mar 2022
      • 1
      • Lima
      #2
      Excelente compañero gracias totales.
      Excellent partner, thank you very much.
      in English please..

        Comment

        • akanoshinobi
          New Member
          • Aug 2025
          • 1
          • indonesia
          #3
          Thanks mate, i will try to use it.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • TyMercer
              Can I flash a working BIOS from one computer to another of the same make, model, etc?
              by TyMercer
              Apologies if this is the wrong forum, but I'm not looking for a specific BIOS file, I'm trying to understand how one makes a clean BIOS file. So here's the background. I have 2 HP EliteDesk 800 g2 mini 35w pcs. One is working fine; the other doesn't have display out or working USB's nor does it have any flashing error lights. The CPU does get worm enough to cause the fan to spin up, so I think it's posting, but I just don't know. I had it working at one point but trouble started when I tried to put in a drive caddy that had a cooling fan on it. I thought it would be compatible but wasn't...
              11-13-2025, 09:39 PM
            • MMH3
              Dell Optiplex 5050 SFF - strange behavior and service_mode jumper not working anymore
              by MMH3
              Hello,

              i have many 5050sff. all of them, and how i experienced over many years for all about 250 DELLs goin through my hands, are fully flashable and can be serviced in any way when the service_mode jumper is set.
              Never ever i experienced problems with that.

              Now i have one 5050sff machine, where this jumper isnt working at all.
              I do not get the normal messge that the jumper is set when booting and a short test with FPT just confirms this. Everything is locked -->> EVEN for reading !?

              The history of the machine is that i used it in my office...
              03-23-2025, 09:28 PM
            • DynaxSC
              GIGABYTE X299 AORUS ULTRA GAMING - SATA PORTS 4-7 NOT WORKING ???
              by DynaxSC
              Hi,

              I have the above mentioned bord after repair, which was related to a lot of missing smd devices on the back of the board.
              There were almost 20 devices missing, caps, resistors and some diodes/mosfets.
              The board is generally working now, all PCIe ports are working, Windows installs normally.

              However I have a problem with SATA ports 4-7 (the board has 8 SATA ports) - disks are not beeing recognized by the BIOS neither by Windows (which is usually normal in case BIOS does not recognize them).
              The SATA 4-7 driver network is quite simple chipset<->buffers/drivers<->SATA...
              03-10-2025, 12:27 PM
            • obelix24
              Macbook Air 2020 (a2179) - touch id not working
              by obelix24
              Hi i have one Macbook Air 2020 where touch ID is not working (it's not scanning fingerprints). Touch ID was working before, there is no error message during scanning fingerprint it's just not scanning on screen you can see only fingerprint but there are no red updates as when it's working. Power button is working fine.

              I've checked boardview and also schematics but i'm not able to find anything related to TouchID ... i have similar issue on a2338 where there was problem with PP3V0_TOUCHID​ and after replacing UT610 it was working but here i'm not able to find anything related to...
              02-09-2025, 12:57 PM
            • ruletero
              how to program it8987E with Vertyanov? is not working
              by ruletero
              Hi

              somebody could explain me how to program ITE8987E with Vertyanov?

              MB: DAG3DBMB8D0 REv. D

              I can detect the EC but it not show the model, next I can read and try to erase but blank check is false.

              neither I can to write, it is false, below I add the log:

              ITE mode selected
              check pins ok
              selected motherboard DAG34AMB6D0 RV 15-AU IT8987E SHAN
              CHECK GND
              Now plug power to the motherboard
              Device ID: EEEE
              Device Revision: EE
              ITE series detected
              Flash ID: EEEEEE
              ...
              06-12-2023, 09:26 PM
            • Loading...
            • No more items.
            Working...