GPU VBIOS for Razer Blade 15 Advanced (RZ209-033)

[shybear]

hi,

when I power ON this laptop it give me this red warning message:

"the detected discrete gpu VBIOS is not meant for this system, press Enter to continue"

Machine start and works properly. I was also able to update machine BIOS to last version 1.06.

I attach here a copy of the orginal VBIOS stored on GPU flash memory chip.

Thanks so much for help.

[SMDFlea]

Post the service tag and the full laptop model number.

[shybear]

Post the service tag and the full laptop model number.

Product No. RZ09-03305F53 s/n BY2041M0210426 Prdouct version: 5.04
don't see any service tag.
Thanks!!!

[SMDFlea]

Product No. RZ09-03305F53 s/n BY2041M0210426 Prdouct version: 5.04
don't see any service tag.
Thanks!!!

What model is your programmer, the backup is 1023KB ,for a 1MB chip it should be 1024KB (1MB) .Can you make another backup

[shybear]

ah hold on, I didn't say that someone had already touched this chip destroying a pcb pitch but using microscope I was able to rebuild lost connection again, so intsead of desolder the VIBIOS chip I saved original BIOS with NVFlash64.
But if you prefer I can desolder again the chip and save it with programmer (EZP2010). BTW I attach here as well the Nvidia utility I used.

[SMDFlea]

Razer RZ09-03305 Product version: 5.04

Unverified vBios https://www.techpowerup.com/vgabios/238149/238149

GPU Device Id: 0x10DE 0x1E93
E4914 SKU 11 VGA BIOS

Manufacturer: Razer
Model: RTX 2080 Super Max-Q
Device Id: 10DE 1E93
Subsystem Id: 1A58 200A
Interface: PCI-E
Memory Size: 8192 MB
GPU Clock: 735 MHz
Boost Clock: 1080 MHz
Memory Clock: 1375 MHz
Memory Type: GDDR6

[shybear]

It worked perfect. Following your help and a bit worried to desolder chip again I reprogrammed it using then NVFlash64 utility and it works fine.
To be able to override Subsytem ID syntax is: NVFlash64 -6 238149.rom

SUPER