I sent my machine to a shop and they were able to extra info from the BIOS chip and sent it to me, but they actually sent to .bin files, could somebody please tell me which one should I send here? they named it minboard.bin (mainboard.bin?) and ec.bin.
HP ZBOOK Firefly 14 G10 BIOS Password
Collapse
X
-
-
I read on another thread for a Firefly G8 that we might need to use both files, perhaps is that why we aren't getting them unlocked? https://www.badcaps.net/forum/troubl...-firefly-14-g8
I'm attaching my 2 files in case someone might want to take a look at them.
Attached FilesComment
-
I need Help with my Locked BIOS on HP zbook 14 G10.
SN: 5CG3235G0D
PROD ID: 7Z1M2UTAttached FilesComment
-
Attached FilesComment
-
Hello, I took my laptop to a shop and they seem to have flashed a G7 bios to it, and the machine (Being a G10A) hasn't booted since. I even tried buying 2 new chips from a seller on ebay that configured them for me(with a G10A BIOS he told me, and made very sure that that's the machine I have before we made business), the machine is still not booting up, the caps lock LED is on/off about 7 times and it does not boot. The tech that worked on it on its infinite wisdom decided not to back up the Original chips before flashing the wrong (G7) BIOS. I still have the original chips in hand
1- is there a way to get the computer back to a working state?
2-Could this be not related to a BIOS and something else broke while they were working on it?
3- Do these machines have some sort of mechanism or board part that bricks if a wrong BIOS is detected as a security measure by any chance?
Sorry for the many question, I'm just a bit frustrated that I've been going back and forth with the shop since a few months now...Comment
-
-
I NEED TO UNLOCK BIOS HP Elitebook G10 THANK'S
SN:5CG33407LB
ProdID:8A815UP#ABAAttached FilesComment
-
Comment
-
Hi please help
unlock the bios
Hp Zbook Firefly 14inch G10
SN: 5CG41536G4
Board Number: 6050A3452701 MB A01Comment
-
Hello,
Could someone please help me with removing BIOS password?
RCUnlocker refuses to do this due to 32MB flash size.
HP ZBook Firefly 14 inch G10
SN#: 5CG41252D1
ProdID: 9A8H9UC#ABA
M/B: SPS:N43988-601
Also, it would be great if you can share the procedure with me so I don't bother you next time. I did my best trying to figure it out but gave up after reading hundreds of posts.
Thank you in advance!Attached FilesComment
-
Hello,
Could someone please help me with removing BIOS password?
RCUnlocker refuses to do this due to 32MB flash size.
HP ZBook Firefly 14 inch G10
SN#: 5CG41252D1
ProdID: 9A8H9UC#ABA
M/B: SPS:N43988-601
Also, it would be great if you can share the procedure with me so I don't bother you next time. I did my best trying to figure it out but gave up after reading hundreds of posts.
Thank you in advance!
MODEL : HP ZBook Firefly 14 inch G10 Mobile Workstation PC
SERIAL : 5CG41252D1
SKU : 9A8H9UC#ABA
BOARD CT : PRTUK00WBJB34O
BUILD ID : 23WWWGBZ602#SABA#DABA
FEATURE BYTE: 476S6b7B7M7R7U7W7m7saBapaqauawb8bUbhcAfPguhKhkjhk8mEn7nVngpDpVpnpqprqFqMqkqz.RT
BIOS VERSION: V70
BIOS VENDOR : Insyde
ENROLLMENT : NO SIGNATURE FOUND
ANTI-THEFT : DISABLE
ME VERSION : 16.1.30.2264 (Not in MEA.dat)
COA KEY :
1) flash patched dump
2) first POST can take up to 5min
3) enter bios, reset to factory default (FIRST PAGE, NOT UNDER SECURITY!)
4) reboot and re enter bios
5) password gone
6) re enter data info from above with BIOS option from first page
Good luck!Attached FilesJoe's KMX1 Pro S, RevelprogIS, TL866II, CH341A, Vertyanov JIG 3.1, Eakins Microscope, Gordak 952, 30V/5Ah PSU, 890C+, T2L Thermal Camera, SVOD 3, etc.Comment
-
BRAND : HP Inc
MODEL : HP ZBook Firefly 14 inch G10 Mobile Workstation PC
SERIAL : 5CG41252D1
SKU : 9A8H9UC#ABA
BOARD CT : PRTUK00WBJB34O
BUILD ID : 23WWWGBZ602#SABA#DABA
FEATURE BYTE: 476S6b7B7M7R7U7W7m7saBapaqauawb8bUbhcAfPguhKhkjhk8mEn7nVngpDpVpnpqprqFqMqkqz.RT
BIOS VERSION: V70
BIOS VENDOR : Insyde
ENROLLMENT : NO SIGNATURE FOUND
ANTI-THEFT : DISABLE
ME VERSION : 16.1.30.2264 (Not in MEA.dat)
COA KEY :
1) flash patched dump
2) first POST can take up to 5min
3) enter bios, reset to factory default (FIRST PAGE, NOT UNDER SECURITY!)
4) reboot and re enter bios
5) password gone
6) re enter data info from above with BIOS option from first page
Good luck!
Thank you so much, I managed to unlock the device.
If you don't mind, could you please point me to the information about how you:
a) Extracted the information like model/serial etc from the bios binary
b) How you created the unlocked binary
Assuming that it is not a secret of course.
I would rather learn how to do this by myself in future.
Also, couple of notes about the unlocking procedure:
a) Initially step 3 did not reset the settings (and step 6 was unnecessary since all data there was retained). The device kept booting in some Factory mode.
I found that this device had "BIOS Sure Start" protection enabled. I unchecked all boxes there and continued to Step 3.
On Step 6 I had to enter some information as you suggested.
After that the device started to complain aboutn missing Critical information "Cirrus Discrete Amp Calibration Data".
I had to use UEFITool.exe with the original BIOS binary, search for CirrusSmartAmpCalibrationData section and preserve 48 bytes in there.
After that, I had to use "HP BIOS Config Utility" to dump all BIOS settings to a file (/get:bcu.txt), add those 48 bytes as shown below and write the config back (/set:bcu.txt):
Code:Cirrus Discrete Amp Calibration Data 30000000020000000E1F1301EE960B00804874BA8B7DDA0117014B290E1E1301EE960B0010C0E8BB8B7DDA011701282B
Hope this will help someone.
Comment
Related Topics
Collapse
-
This specification for the HP ZBook Firefly ZBook Firefly 14 G8 Mobile Workstation Bundle Mobile workstation can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the ZBook Firefly 14 G8 Mobile Workstation Bundle boardview and ZBook Firefly 14 G8 Mobile Workstation Bundle schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on...09-07-2024, 05:20 AM
-
by zeniusHello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...-
Channel: BIOS Requests ONLY!
-
-
by phoxicyHP ZBOOK Firefly 14 G10 A HAVE BIOS Password,can anyone help? thanks a lot
mother board number is 6050A3458701-MB-A01
SN:5CG4152KCY
it has two chip both of 32MB...-
Channel: BIOS Requests ONLY!
04-15-2025, 03:22 AM -
-
by peeperHello. Please help. The hp zbook firefly 16 inch g11 is blocked by password.
SN:5CG4396V71
ID ПРОДУКЦІЇ: A6UF0UT#ABA
post moved...next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..
...-
Channel: BIOS Requests ONLY!
-
-
by traxformaniaHello,
I'm using TONGFANG "GM7TG7P" model laptop for over 3 years and i'm entering the same bios administrator password everyday. My laptop has Aptio BIOS (American Megatrends, AMI).
But today it's not accepting my password. I'm %100 sure i'm entering the correct password.
I'm trying to reset my bios without success.
I tried :
-I removed the BIOS battery and main battery. Waited for a long time but it didn't work. They already stated in the user manual that the password will not be reset even if the batteries... - Loading...
- No more items.
Comment