removed GPU bcz of short Lenavo z51-70 now no display can any one mod this bios to only uma enabled
-
-
Model number "Lenavo z51-70" added to thread title. Read the rules,post the laptop serial number https://www.badcaps.net/forum/troubl...before-posting
-
Hey,
I got HP Pro Mini 400 G9 waiting for a long time for a CPU. Bought I3-12100T which is on supported list just to receive code 3,6 which says "Processor does not support an enabled feature".
After research I found this is most likely due to all the management stuff being enabled in BIOS (it has vPRO essentials I5 sticker so that is very likely) where 12100T definitely does not support it.
Unfortunately I wasn't able to find any friend who would have and lend me their CPU to fix that... so the question is, can this be changed at bios dump level?
I attached... -
Hello everyone!
I have a surface pro 4 (1724) with corporate management set up (in this case, I understand it's called SEMM). In the operating system installer (Pro version), after connecting to Wi-Fi, it asks me to enter the company system. If I don't sign in, it won't let me continue (similar to enterprise enrollment on chromebooks). This can be avoided if I install the Home version instead of Pro, and then upgrade to the pro version, but this is not very elegant. I would like the machine to be as it should be in factory condition. That's why I would like someone to remove this restriction... -
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello
Can you help me remove the dump password E89382 HSB j mv-4 94v-0
the device name- Getac
model - S410...
Comment