Announcement

Collapse
No announcement yet.

Asus ROG GA503RS - No display after BIOS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Asus ROG GA503RS - No display after BIOS

    Hi,

    I've got a problem with laptop Asus ROG GA503R, laptop power on (it does take a while) show asus logo and then it stuck on the black screen noticed that laptop goes to windows. I've tried new LCD, no difference, I can go to BIOS, laptop would stay on can change options etc., tired boot it externally with disconnected LCD and it only display on BIOS, attempt to boot to Linux, same problem.

    I would provide with board model tommorow.

    #2
    Need sn

    Comment


      #3
      danjpmb3aa0 rev:a Model NJP SN:N3NRCX13C70113G

      Comment


        #4
        Originally posted by tommy97 View Post
        danjpmb3aa0 rev:a Model NJP SN:N3NRCX13C70113G
        Model: GA503RS

        Comment


          #5
          New bios fixed the problem.

          Comment


            #6
            Ok. Goodluck

            Comment


              #7
              Hi everyone,

              Have a ASUS GA503RS, it turns on, but after showing the logo the screen stays black. :-/
              No success trying another screen, no external image either.

              So after reading this thread and seeing similar issues being fixed with a BIOS flash, I would give this a try.

              Have a CH341 programmer and can solder pretty well.

              Details on the device:
              ASUS GA503RS-LN055W
              SN: N6NRCX076422248
              MB: DANJPMB3AA0 REV:A

              The BIOS chip is a Winbond 74M25JWEIO, my research shows it is a 1,8V powered chip, 256Mbit in size.
              My NeoProgrammer software has a W25Q256JW chip with 1,8V listed, I assume I can use those settings
              to read and write.

              Thanks in advance for any help.

              Comment


                #8
                Originally posted by Red-Raven-1 View Post
                Details on the device:
                ASUS GA503RS-LN055W
                SN: N6NRCX076422248
                MB: DANJPMB3AA0 REV:A

                The BIOS chip is a Winbond 74M25JWEIO, my research shows it is a 1,8V powered chip, 256Mbit in size.
                My NeoProgrammer software has a W25Q256JW chip with 1,8V listed, I assume I can use those settings
                to read and write..
                Post moved to RS thread from RM . Yes, you can choose the winbond chip manually. Post your backup here
                All donations to badcaps are welcome, click on this link to donate. Thanks to all supporters

                Comment


                  #9
                  Originally posted by SMDFlea View Post

                  Post moved to RS thread from RM . Yes, you can choose the winbond chip manually. Post your backup here
                  OK, it took me a while but here is the dumped and verified BIOS. (Details in post #7 of this thread).
                  Attached Files

                  Comment


                    #10
                    Donation, done. - Still hoping for sone help on the ASUS BIOS. 🤞

                    Comment


                      #11
                      Originally posted by Red-Raven-1 View Post
                      Donation, done. - Still hoping for sone help on the ASUS BIOS. 🤞
                      Try
                      Attached Files

                      Comment

                      Working...
                      X