BIOS Request: Razer rc09-03304e42

[sikocan]

This one boots no post.
Serial: BY2032A98801257

I've tried cleaning ME Region, failed ;(
Used this guide: https://winraid.level1techs.com/t/gu...zation/31277/2
At section, I couldn't find this field:

At "SMIP Signing Key" field, input the placeholder RSA Private Key (dummy.pem) that was created by the OpenSSL tool. Then go to "Build > Build Settings", input the Manifest Extension Utility (MEU) executable location at "Intel(R) Manifest Extension Utility Path" field, input Win32 OpenSSL Lite 371 executable location at "Signing Tool Path" field, make sure that "OpenSSL" is selected at "Signing Tool" field, make sure that "Verify manifest signing keys against the OEM Key Manifest" is set to "No", leave all other settings intact and click Close.

Error:
Executing post-build actions

Error 241: [Ifwi Actions] Failed to validate Key Manifests. The public key in "PMC Binary File" does not match the public key hash in the Key Manifests.

Error 21: [Csme Binary Gen] Error executing post-build actions.

Error 2: Failed to build.

Failed to build!


Thank you.

[rex98]

This one boots no post.
Serial: BY2032A98801257

I've tried cleaning ME Region, failed ;(
Used this guide: https://winraid.level1techs.com/t/gu...zation/31277/2
At section, I couldn't find this field:

At "SMIP Signing Key" field, input the placeholder RSA Private Key (dummy.pem) that was created by the OpenSSL tool. Then go to "Build > Build Settings", input the Manifest Extension Utility (MEU) executable location at "Intel(R) Manifest Extension Utility Path" field, input Win32 OpenSSL Lite 371 executable location at "Signing Tool Path" field, make sure that "OpenSSL" is selected at "Signing Tool" field, make sure that "Verify manifest signing keys against the OEM Key Manifest" is set to "No", leave all other settings intact and click Close.

Error:
Executing post-build actions

Error 241: [Ifwi Actions] Failed to validate Key Manifests. The public key in "PMC Binary File" does not match the public key hash in the Key Manifests.

Error 21: [Csme Binary Gen] Error executing post-build actions.

Error 2: Failed to build.

Failed to build!


Thank you.

try.
i used Intel CSME System Tools v14.0 r4 (For 400-serie Comet Lake H_LP systems which run CSME v14.0) it has no errors.

[sikocan]

Thanks for your help, I had used 14.5.45.1763_CON_V_A_PRD_EXTR which gave me the error, I'll keep in mind to use same version next time. Thank you