HP ProBook x360 435 G7 Bios bin request

[Abi Abi]

Hi,

I need bios bin for HP ProBook x360 435 G7 PRIMR0SE-6050A3154701-MB-A01(A1)

U366 and U367.

Laptop turns on but there is no video (black screen)

Thanks all.

[SMDFlea]

Hi,
I need bios bin for HP ProBook x360 435 G7 PRIMR0SE-6050A3154701-MB-A01(A1)
U366 and U367.
Laptop turns on but there is no video (black screen)
Thanks all.

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.
• Provide a BIOS/EC dump if possible
• Attach files directly to your post instead of linking to external websites

[Abi Abi]

Laptop Model: HP ProBook x360 435 G7
SN: 5CG03821YC
MB Model: PRIMR0SE-6050A3154701-MB-A01(A1)
Request: I need a Bios bin, please

[SMDFlea]

If you have bios backups post them...., if you don`t have any then please state why !

[bluethoraipakkam]

Try this bin

[Abi Abi]

Thank you very much.

I flashed U367 Chip and it works.

[madjid911]

Try this bin

Hi, I have a problem with the bios, "Hp endpoint security controller error " , I tried your bios but the result is the same, the screen ends up being black without display after a few minutes of use on the internet, I think it is linked to this bios error, can you correct it for me please?

HP X360 435 G7
SN : 5CG029223W

[hoaca388]

Hi, I have a problem with the bios, "Hp endpoint security controller error " , I tried your bios but the result is the same, the screen ends up being black without display after a few minutes of use on the internet, I think it is linked to this bios error, can you correct it for me please?

HP X360 435 G7
SN : 5CG029223W

Hp endpoint security controller error

[madjid911]

Hp endpoint security controller error

thanks, the error is gone, but it shows that it is stuck in manufacturing mode, is this a problem?

[hoaca388]

thanks, the error is gone, but it shows that it is stuck in manufacturing mode, is this a problem?

No, just fill in this DMI information.

HP ProBook x360 435 G7
Serial : 5CG1330XVR
Sku : 226V3UC#ABA
Fearture byte : 3X476J6S6b7B7J7M7R7W7maBapaqauawbVdUdpdqeMfPj4k8mEmVnW.gH
Build Id : 20WWPMDT601#SABA#DABA
CT Number : 6MESTX1TZFP71P

[paulofcostas]

--- I'm using Google Translator below---

Hello, I need help.
I have an HP Probook x360 435 G7 laptop with a bios password (Power-on Authentication).
When I updated to Windows 11, two-factor authentication returned and I tried to reconfigure it to make the boot in one step, but I had problems when I had to re-register my fingerprints in HP Client Security Manager.
I lost the bios password and would like to try ways to remove it.
HP refuses to help by sending a file with a USB flash drive to unlock it and says that there are new security guidelines and that I need to buy a new motherboard, which here in Brazil is extremely expensive.
Can you help?
HP ProBook x360 435 G7 Notebook PC (8RA65AV)
Product 18Z98LA
SN 5CG038B2K

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[peste]

post the original contents of the bios chip..

[YOUNES MIH]

REMVE PASS PLZ
HP ProBook x360 435 G7
prod d 8RA64AV
SN: 5CG0331V6T

[hoaca388]

REMVE PASS PLZ
HP ProBook x360 435 G7
prod d 8RA64AV
SN: 5CG0331V6T

Password removed