-
-
i flashed the EC chip with the file that i attached and it turn on but on the other side MPM product information not valid. could someone help me?
the serial number is 5CG1163FWF
Don't post pictures unless asked..Comment
-
hello guys, any one there to assist with this
HP Probook 635 Aero G7 Endpoint Security Controller Problem
ProdID:443V8PA#ABJ
SN: 5CG1241VR0
attatched main biosComment
-
Hi everyone. Can you please help with this laptop? Hp probook 635 aero G7. I think there is a problem with the bios. No matter what I do, it won't accept booting from usb and trying to boot from the original SSD gives the error Clock watchdog timeout. I am attaching the flash bin files of both bios chips. I would like to reprogram the bios.
ProID 2W8S0EA#ABF
SN: 5CG1152XFH
Board ID: LINDEN-6050A3147201-MB-A01 (A1)Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Thank you very much. Just to confirm that the bios files worked perfectly. Though the issue still persists at least I ruled out the bios as the culpritComment
-
Please.. someone help to fix my broken HP PROBOOK AERO G7 BIOS BIN
product ID 443V8PA#ABJ
SN #5CG12529BF
Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
PLEASE FIX HP Endpoint Security Controller Problem, THANKS
Comment
-
.Comment
-
Notebook HP ProBook 450 G8
ProdID 2K8L1LT#AC8
Mother: DAX8QAMB8D0 REV D
The device had bootloop issues. I reprogrammed the EC BIOS and the main BIOS, extracted from an HP 440 G8 with the same motherboard, and I was able to start the device. However, every time I turn it on, I get the error 'There is a problem with the HP Endpoint Security Controller in the unit.' I tried disabling several security options in the BIOS, but the error still appears. Additionally, when I attempt to update the BIOS, both BIOS chips get corrupted again....03-10-2025, 07:12 AM -
accidentally after the upgrade to 1.28 suddenbly my i hp probook 640 g4 stucks hp endpoint security controller i already downgrade the bios to 1.15 still the same and again revert back to 1.28.
any solution for this issue? -
Hi, I have a problem with my HP EliteDesk 705 G5 Small Form Factor computer on amd . Standard corrupted bios probably corrupted during the update. I have uploaded a clean dump from the manufacturer's website with the latest version but when I turn it on a message appears :
HP Endpoint Security Controller problem
there is a problem with the hp endpoint security controller on the unit
I tried restoring the bios security to factory defaults after the first switch-on because this helps with intel-based laptops. Here unfortunately this did not help. Does anyone have... -
Hello
i need help
I have a laptop HP Probook x360 435 G7 with bios password
I succed to remove the password with the RC toll and right now i have this mesage on the scren "HP Endpoint Security Controller Problem " "Please contact the HP.Inc to have the unit serviced".
I have read the both bios chips and i have posted a picture with the chips pozition.
Can anybody help me with intruction or look on the dump if something is wrong ?
Thanks in advance!!
Edit
Serial 5CG03947C4... -
please Help Me ... ProBook 430 G8
HP EndPoint Security Controller Problem...
Comment