Hi Guys, Pls Need bios dump HP Zbook Fury 17 G7 LA-J203P EC & Main
Need bios dump HP Zbook Fury 17 G7 LA-J203P
Collapse
X
-
Re: Need bios dump HP Zbook Fury 17 G7 LA-J203P
https://www.badcaps.net/forum/showthread.php?t=103570
always when you make a request for bios, post the original bios even if it is corrupted.. the full name and model, the S/N... etc...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Re: Need bios dump HP Zbook Fury 17 G7 LA-J203P
sry i have just one file check and raportAttached FilesComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Hello,
laptop started with black screen. After repair the BIOS (ver.01.04) and upgrade to latest ver. 01.20.00 the Endpoint Security Controller Problem occured.
I've tried to fixe this error but after programming it's still active
CND1105QRY
Fix this bug please.
Comment
-
Comment
-
Thanks SMDFlea
Endpoint Security Controller problem disappeared.
MB run in Manufacturing Programming Mode, after DMI/ID data BCU complete everything works fine.
Comment
-
Good day
Please Help CLEAR ME this file
HP ZBOOK FURY 17 G7
SN CND0475D20
FAULT: Late display
Attached FilesComment
Related Topics
Collapse
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
-
by tcbucherBeen working to unlock a zBook Fury G7 17, SER# 2TK1380178.
Has a removable MacronixMX25L256 BIOS chip. Have attempted to unlock the BIOS with multiple suggestions using a CH341A programmer.
Any help unlocking the bios password would be appreciated. Bios attached.
Thanks...-
Channel: BIOS Requests ONLY!
-
-
Hello engineers 😀,
I’m kindly requesting a clean and unlocked BIOS dump for the following HP laptop, as it’s bricked after flashing SP152727. The system now keeps rebooting, and the original issue was an Administrator / Power-On Password that I can no longer access.😏
🔧 Device Info:
- Model: HP 15-da2007ne
- Product Number: 8XF55EA#ABV
- Serial Number: CND0338P0D
- CPU: Intel Celeron N4000
- EC/BIOS Chip: [Add chip number from the motherboard or BIOS chip]
💀 Problem:😅
- Device shows “Administrator Password”...2 Photos-
Channel: BIOS Requests ONLY!
-
-
by CityminHi all,
My Samsung Galaxy Book 2 Pro 15.6-inch laptop has no display and won't boot.
The charging red LED lights up, but the charging screen doesn't show any indication.
When I press the power button, the blue LED cycles on and off three times, then the screen doesn't turn on, and the device won't boot.
(I've tried removing the battery and resetting the device, but the issue persists.)
NoteBook Model name : Samsung NT955XED-KK51G(Galaxy book2 pro, i5-1240p, 15.6inch AMOLED)
PCB model name : Venus2-15-5G(REV1.2), Venus2-15 ADL NPC
S/N : 5RNK9FFT70...-
Channel: BIOS Requests ONLY!
-
-
by loopsterHello guys,
could I please get some help cleaning the ME region of the attached Zbook 17 G1 bios dump (CH341a, neoprogrammer, chip-desoldered, dumped twice, identical checksum)?
Symptoms, delayed BIOS post (ca. 45 secs.) keyboard not working, touchpad not working, booting linux live, console says "Management engine not configured".
I tried following the ME firmware cleaning guide, but whatever Flash Image Tool version I try, I get the same error:
Error 10: Failed to open with processed commands.
Unable to open file: C:\Users\Elitebook...1 Photo-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
Comment