Hi Guys, Pls Need bios dump HP Zbook Fury 17 G7 LA-J203P EC & Main
Need bios dump HP Zbook Fury 17 G7 LA-J203P
Collapse
X
-
Re: Need bios dump HP Zbook Fury 17 G7 LA-J203P
https://www.badcaps.net/forum/showthread.php?t=103570
always when you make a request for bios, post the original bios even if it is corrupted.. the full name and model, the S/N... etc...Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
>>>>> https://www.badcaps.net/index.php?pageid=donate1 <<<<<
Every donation made will go towards server fees and maintenance costs. -
Re: Need bios dump HP Zbook Fury 17 G7 LA-J203P
sry i have just one file check and raportAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae..Comment
-
Hello,
laptop started with black screen. After repair the BIOS (ver.01.04) and upgrade to latest ver. 01.20.00 the Endpoint Security Controller Problem occured.
I've tried to fixe this error but after programming it's still active
CND1105QRY
Fix this bug please.
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
tryAttached Filesif you find these attachements useful please consider making a small donation to the site
Comment
-
Thanks SMDFlea
Endpoint Security Controller problem disappeared.
MB run in Manufacturing Programming Mode, after DMI/ID data BCU complete everything works fine.
Comment
-
Good day
Please Help CLEAR ME this file
HP ZBOOK FURY 17 G7
SN CND0475D20
FAULT: Late display
Attached Filesif you find these attachements useful please consider making a small donation to the site
Comment
Related Topics
Collapse
-
by AhariHi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I...-
Channel: BIOS & Schematic Requests!
-
-
by harounHDneed clear me bios for hp zbook fury 17 g7
serial number CND1273QQ4...-
Channel: BIOS Requests ONLY!
-
-
by zlr8rGreetings
I am hoping someone could have a check of my Hp Zbook Firefly 14 G10 , 2 x 32MB Bios files... (powers on / black screen).
Serial Number: 5CG3202C16
Product #/SKU: 739P0AV
CT Number: PRTUE00WBI30YX
Description: HP ZBook Firefly 14 inch G10
BuildID: 23WWWGAZ602#SABU#DABU
Feature Byte: 476J6S6b7B7M7Q7U7W7m7saBaEapaqauawbUbhcAfPgSguhKj4jhk8mEn7nVngpDpVpWpnpqprqMqkqz.G3
MAC address not found.- I extracted both 32mb bios files (Main + EC). But when i run the main 32mb bios through MFIT.exe , it produces this error; ie:,
...-
Channel: BIOS Requests ONLY!
-
by mkdjDear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would...-
Channel: BIOS Requests ONLY!
-
-
by Habble7The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
...-
Channel: Troubleshooting Computer Displays
-
- Loading...
- No more items.
Comment