lenovo P1 gen1 17870-1 need 32mb bios dump

[ctebke]

Hello, i have Lenovo P1 Gen1 with boot loop problem. Notebook start with normal logo and then after second display message: "Configuration changed - Restart the system." and loop... I think that problem is with corupted bios. Does anyone have corect BIOS dump?


Here is my original bios dump:

[Vesko356]

Re: lenovo P1 gen1 17870-1 need 32mb bios dump

Hello, i have Lenovo P1 Gen1 with boot loop problem. Notebook start with normal logo and then after second display message: "Configuration changed - Restart the system." and loop... I think that problem is with corupted bios. Does anyone have corect BIOS dump?


Here is my original bios dump:

Try:

[qayyum786]

Re: lenovo P1 gen1 17870-1 need 32mb bios dump

hello, i have lenovo p1 gen1 with boot loop problem. Notebook start with normal logo and then after second display message: "configuration changed - restart the system." and loop... I think that problem is with corupted bios. Does anyone have corect bios dump?


Here is my original bios dump:

try

[Haker5]

Re: lenovo P1 gen1 17870-1 need 32mb bios dump

try repair file

[ctebke]

Re: lenovo P1 gen1 17870-1 need 32mb bios dump

HACKER5, Thanks a LOT, works perfectly with your dump. :-)

[ctebke]

Re: lenovo P1 gen1 17870-1 need 32mb bios dump

Try:

With this dump notebook did not power on :-( but thanks anyway

[testinglaptops]

Lenovo P1 Gen 1 (with GPU)
Motherboard 17870-1
16 MB bios

Problem: laptop display was ok , but after shut down or battery empty, laptop gives no display. when remove battery, laptop display ok. (changed battery and CMOS) but not fixed the problem.
I clean Me bios but after programing no display. I tried 2 more bios but same status.
Attached file is original bios. can any one fix this bios for me. thank you

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://badcaps.net/forum/showthread.php?t=88758 )

[adamgouadma]

ello guys I have a LENOVO THINKPAD P1 There I need a way to remove the password

Plate Number 17870-1

ST 20ME-S27E00

Thanks in advance

[Maxpower3]

ello guys I have a LENOVO THINKPAD P1 There I need a way to remove the password

Plate Number 17870-1

ST 20ME-S27E00

try for test

[adamgouadma]

try for test

Sorry, it didn't work. The computer doesn't turn on

Thanks for trying

[Maxpower3]

Sorry, it didn't work. The computer doesn't turn on

Thanks for trying

retry 2 another patch

[adamgouadma]

retry 2 another patch

The computer turns on and then makes a sound

And there is no screen

[Maxpower3]

The computer turns on and then makes a sound

And there is no screen

you tried 2 files

Wait well after the beeps, several restarts sometimes

more try

[Maxpower3]

it worked here in 16MB, why 32 doesn't want

https://www.badcaps.net/forum/troubl...73#post1873373

https://www.badcaps.net/forum/troubl...92#post1873392

[adamgouadma]

you tried 2 files

Wait well after the beeps, several restarts sometimes

more try

The first one catches fire The password is still there

The second one does not turn on the computer Thanks

[Maxpower3]

The first one catches fire The password is still there

The second one does not turn on the computer Thanks

first power on ? no beep or lag
if I understand correctly with all the tests, if the hash is corrected the PC does not start.
all the chk files do not start

[adamgouadma]

first power on ? no beep or lag

Good without beeping or delay

But the password is still there

[adamgouadma]

first power on ? no beep or lag
if I understand correctly with all the tests, if the hash is corrected the PC does not start.
all the chk files do not start

I will try it and let you know the results

[adamgouadma]

first power on ? no beep or lag
if I understand correctly with all the tests, if the hash is corrected the PC does not start.
all the chk files do not start

Unfortunately it didn't work

There is a beep and no screen

[Maxpower3]

Unfortunately it didn't work

There is a beep and no screen

which EC? 1653 always
try bypass with lpc