Hello Friends, can someone help with this amd bios, it didn't turn on anymore after a flash from windows
SN R9101C90
SN R9101C90
-
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Re: ideapad 5 14are05 bios please s/n R9101C90
Thank you very much, working perfectly
Comment
-
Hi, i have the same pc (FLEX 5 14ARE05 81X2) with the same issues, i've googled and bought a CH3414 programmer and tried to catch a dump from te chip. CHIP is the MX25U12873F_1.8V. The serial number is: R90YD6XN.
I tried to update the bios with the EECN44WW version and after the manual installation now is stuck on black screen and blinking power led. Can someone help me? TNX
Comment
-
Flex 5-14ARE05 Laptop (ideapad) - Type 81X2Hi, i have the same pc (FLEX 5 14ARE05 81X2) with the same issues, i've googled and bought a CH3414 programmer and tried to catch a dump from te chip. CHIP is the MX25U12873F_1.8V. The serial number is: R90YD6XN.
I tried to update the bios with the EECN44WW version and after the manual installation now is stuck on black screen and blinking power led. Can someone help me? TNX
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Hey, tnx, i'm a little noob, i have to load this file in asprogrammer and write? Or other? TNXComment
-
The PC started)))) Thank you so much!!!
Comment
-
When i start he ask me the power cable for a bios update what i should do ?Comment
-
Hello all, Can someone please repair this dump? I cannot figure out how to get my SN, ME, etc information into a working BIOS .bin file to reflash my chip. I have extracted the .CAP from the most recent BIOS update on Lenovo's website but I'm not sure which data i need. Thanks so much. My SN is R90ZK3M0 and model is 81X2.Comment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Good day, im insearch of help. Could someone verify or rebuild bios ?
Lenovo ideapad 5 14are05
FLMA0 LA-J701P
REV 1.0
SN MP1SKQ37
MTM 81YM008WLTComment
-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donateComment
-
Hi there, i have the same problem as above with the lenovo IdeaPad Flex 5 14ARE05, my SN is: R90YE99D
mainboard pn: 5B20S44387
not sure about the state of the dump attached, thanks for the help!Last edited by bnajo; 11-21-2024, 12:02 PM.Comment
-
[QUOTE=bnajo;n3512221]Hi there, i have the same problem as above with the lenovo IdeaPad Flex 5 14ARE05, my SN is: R90YE99D
mainboard pn: 5B20S44387
not sure about the state of the dump attached, thanks for the help
R910TQM7 please help me
Comment
-
Dear all,
I have recently fixed a Lenovo IdeaPad 3 15 ALC6 that was not booting due to a BIOS issue. After flashing the BIOS, the laptop boots up, but hard disk is not recognized in BIOS. Is says "Hard Disk : Not Installed". I have tried with 2 different drives (one that I know is working on another laptop) but I get the same result. I do not know if disks were recognized before I got the laptop and fix it, but I don't see any reason why not. I can boot on USB though.
Here the steps I have taken to fix the laptop:
- downloaded latest BIOS from Lenovo Website... -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
So a couple of years ago i got a bios update through Lenovo Vantage, so i installed it and bricked my whole BIOS, so i couldn't fix it so i put that ideapad in a box, 3 years later i found that one PC and want to recover it to switch from a 2014 hp laptop to this one.
I found a method to recover the BIOS of many lenovo laptops tha consists in pluging in a USB Flash with the BIOS files and power on the laptop with Fn + R keys pressed until fans go loud and start beeping loud, but nothing worked, so i think filename is wrong, i tried naming the bios file as 07WW.BIN, BIOS.BIN, BIOS.fd,...10-11-2024, 03:12 PM -
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder... -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If...
Comment