Can anyone identify the component circled in red, from a REV4.00 board, i have searched for a schematic, but unable to locate one, removed blown component but board still not powering up.
Attached Files
-
-
Re: Bdl50 la-d704p rev 4.00 question
You should try to make a better picture where the colours are more clear. But from what I can see it should be an inductor and also the only one on this rail so obviously really important.
However you should also make sure that the load side of the attached buck converter is healthy
-
Hi
I'm trying to locate what i believe to be Radial Electrolytic Capacitors 100v 82uf Non-polar for a Skytec Crossover filter.
Thanks -
I have a quad charger that is split into 4 separate sections and one section doesn’t charge anymore. I have located what I think is a thermistor and on the shrink tube it says 125 degrees C. I cut the shrink tube and it's a 33 ohms resistor. It measures a little less than 1/2 inch in length. I am including pictures of it. Please help me identify it. So, it should test at 0.4ohms and probably go up in resistance with the rise in temp. On the board it clearly says R for resistor. But it has to be a special one.
Resistor shows orange range silver gold and green lines.
Thanks in adv... -
-
MacBook Pro 820-01598 - taking only 5v 0a on the meter- I'm a complete novice and new to this wonderful forum. Ive been fixing Macs for 25 years but am finding that I need to ship my boards out for cap repair more often than not and as I now share my building with somebody with all the equipment to do board level repairs I want to try to fix some of those issues in house. I am finding so many time clients bringing in their mac's with zero power. I have been trying to understand some of the forum I have searched through and am a little out of my depth but want to learn if I can from you talented... -
Searched online but wasn't able to find. Trying to locate a copy of this document - AutoLeap Oscilloscope Handout.
Comment