Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Bdl50 la-d704p rev 4.00 question
Can anyone identify the component circled in red, from a REV4.00 board, i have searched for a schematic, but unable to locate one, removed blown component but board still not powering up....
-
Re: Hp 2x usb ports not working
Thank you,
Here's an odd thing, i disconnected the ribbon cable to the other single usb port on the right hand side of the laptop today (this has always worked ok) & (see photo enc) & to my surprise the 2 x left usb ports sprung back to life...does this still mean "US1" ic as previously mentioned is still faulty please, when i plug the right side back in the 2 left ports go dead again..it's an odd thing going on, hope somebody can advice before i commence to replace components......Last edited by frankkrantz; 02-11-2020, 11:03 AM.
-
Re: Hp 2x usb ports not working
Unable to find a datasheet at the moment, no referance to K1126, maybe someone knows it as another component name i cant find any info at all on this ic ..thanks
Leave a comment:
-
Re: Hp 2x usb ports not working
ok thanks, i understand, where can i buy the part ? i can't find a referance to it anywhere online...hope you can advise..
Leave a comment:
-
Re: Hp 2x usb ports not working
Where can i get this chip from if faulty, is there a work around or can i buy the chip ? thanks..
Leave a comment:
-
Re: Hp 2x usb ports not working
will do thanks, what does US1 IC actually do ? should there be a voltage on all pins ?
Leave a comment:
-
Hp g5 250 bdl50 la-d704p rev:4:0
Is a schematic available maybe for this motherboard please ?
Leave a comment:
-
Hp 2x usb ports not working
HP BDL50 LAD704P (HP 250 G5 MODEL)
Hi,
Both usb ports have stopped working.
Does anyone know what component may require replacement from looking at the enclosed photo, i have noticed if i plug a 5v supply usb lead into any of the 2 ports they both work again, (maybe that helps to diagnose the issue).
Thank you...Last edited by frankkrantz; 02-09-2020, 10:18 AM.
-
K1126
K1126ic
Does anyone know what this component is please, i canot find a data sheet/schematic for it at all..
I think it may be power supply to usb 5v.
Kind Regards
Frank Krantz...
-
Re: Usb x2 ports not working hp g5 250
Many thanks, i have flipped the board & found U51 the component itself is marked K1126, could this be the faulty item ?, i have a donor board so i could swap the parts if you think maybe this is the culprit !
Any idea what DM2 is ? (photo encl) it is marked i think H9M ?
Hope you can advise
Frank....Last edited by frankkrantz; 02-14-2019, 08:17 AM.
Leave a comment:
-
Usb x2 ports not working hp g5 250
Hello,
I have 2 usb ports with no 5v power, if i plug an external powered usb hub it works ok and power is restored to both ports all be it temporarily & the pc recognises the device attached, so i presume data is ok just no 5v power.
There is a third usb port on a small separate board on the other side of the laptop thats works fine.
Does anyone know what componenent may be causing the issue, and if possible what should i replace that may be the culprit ??
The 2 ports are shown in red in the attachment enc,...
No activity results to display
Show More
Leave a comment: