ENE KB9022G-D KB9022G D KB9022G IO controller ic BGA
Can you tell me if this is programmable and if so, what programmer can be used? Thank you
Can you tell me if this is programmable and if so, what programmer can be used? Thank you
-
Start getting windows based machines with blown SuperIO/KBD controller ICs. Seems like IT80 serries cant be programmed with CH341. Although there is some info for KB90xx controller here - http://dangerousprototypes.com/docs/...ith_Bus_Pirate Doesnt look like NeoProgrammer supports IT8xx series
What do you guys use?
I was looking at these options:- RT809F with ITE SMBUS adapter - https://www.aliexpress.com/item/1005008719739481.html
- XZZ IT8390
-
Hi electronic folks
Does anybody know if this controller is programmable or not ?
I have replaced this controller on a MSI MAG B560 TOMAHAWK board, as it had a short on VCCS pin (pin 41). I have ordered a few new on Aliexpress, they seem to be original, however they do not start to work. When I move same chip from a second working board to the one I have replaced the RAA229001, the VRM starts normally to work. It seems that the chip is OK, as it generates on the VCCS pin nearly same voltage as a chip on a second working board i have (VCCS probably it's some internal reference... -
I have an ASUS ROG Strix- G513IH-HN008, motherboard G513-6050A3249301- MB-A04 (A4)
When I received the device, the device has no function. After an investigation, I found that the PWM CONTROLLER RT6575B (U6100) is getting warm and there is a short circuit at the 3V3 output. This normally supplies 3V3 for the embedded controller IT5571E-128 (U301). When measuring and analyzing with a thermal imaging camera, I found that some components are damaged: SLG4E42553VTR (U8500), IT5571E-128 (U301), LAN RTL8111H (U450), LOGIC 74LVC1G08GW (U1900), RT6575B (U6100) All these components are on... -
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Hello everyone ,
I have vertyanov programmer . It work fine , but i have an issue with programming io , when i use an io from an other board .
In my country , we cannot buy online new io clean .
So we use io from faulty motherboard .
After soldring the io , checked all pins are ok using microscope , the programmer cannot communicate and identify the io .
For exemple , problem with asus x540ub and this issue is common with all asus motherboard , when i try to program the io inline , using io from faulty motherboard .
Are there any trick to solve this...09-20-2022, 05:03 AM
Comment