Hello everyone ,
I have vertyanov programmer . It work fine , but i have an issue with programming io , when i use an io from an other board .
In my country , we cannot buy online new io clean .
So we use io from faulty motherboard .
After soldring the io , checked all pins are ok using microscope , the programmer cannot communicate and identify the io .
For exemple , problem with asus x540ub and this issue is common with all asus motherboard , when i try to program the io inline , using io from faulty motherboard .
Are there any trick to solve this problem ?
Thanks for everyone .
I have vertyanov programmer . It work fine , but i have an issue with programming io , when i use an io from an other board .
In my country , we cannot buy online new io clean .
So we use io from faulty motherboard .
After soldring the io , checked all pins are ok using microscope , the programmer cannot communicate and identify the io .
For exemple , problem with asus x540ub and this issue is common with all asus motherboard , when i try to program the io inline , using io from faulty motherboard .
Are there any trick to solve this problem ?
Thanks for everyone .