my friend
What is the meaning of this integration?
4*5 pin
thanks
What is the meaning of this integration?
4*5 pin
thanks
Attached Files
-
-
OpenBoardView — https://github.com/OpenBoardView/OpenBoardView -
Re: casper motherboard parts identification
thanks friendsComment
-
This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.
There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as... -
Hello everyone,
I'm trying to identify a component near the LCD connector but I can't find any schematics on this particular motherboard.
Does anyone knows what are its specs?
Thank you in advance.
... -
I have a wrong motherboard,does not switch on,no power.the framed part heats up,and the smd market is RUA3 but I couldn't find this part.I search schematic thank you... -
Hello everyone,
Trying to identify what the component pointed by the arrow is for a HP Envy 13aq1001-ca motherboard for which I can't find the schematics nowhere. It is marked Q61010 on the silkscreen and the component is marked V74 14 01 X917.
Anybody have an idea what this component is?
It is shorted on a few of its legs.... -
Hello,
I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.
My question is, can I update the Bios on this G733 motherboard to a G533 Bios.
The reason for wanting to do this is that the keyboard isn't working as it should, and I think this...
Comment