Hello,
As I said in the previous post I reordered the chip from another supplier. And after resoldering the chip everything is fine now ! The laptop starts and run fine!
Thank you for your help!
Have a good day!
Tapawan_oxiba
Member
Last Activity: Yesterday, 10:47 AM
Joined: 06-13-2024
Location: Saint-Pierre
-
Hello everyone!
Just a little update. I ordered 5 chips on December 2024, and received them yesterday. I replaced the chips and..... with two of them I have 1.00V on phase 2 and 0.65V on phase 1, with two other: nothing at all, and the last one just blew on my face....
I'll reorder this chip from another supplier and see what happens.
Have a nice day.Leave a comment:
-
Okay,
I'll order the chip. Since I live on an island it can take a bit of time until I receive it.
I'll keep you updated as soon as possible.
Thank you....Leave a comment:
-
Hello,
Resistance to ground on pin 13 is 6.4k Ohms.
Yes I confirm that the chip hasn't been replaced before. The SMD marking is corresponding to R6575DGQW....Leave a comment:
-
Oh, my bad then!
Thank you the boardview....Leave a comment:
-
Hello,
No low values on those rails. The enables are not present for 3.3VALW and 5VALW (same chip).
Unfortunately there is no schematics available for this motherboard.
:/Leave a comment:
-
UpLeave a comment:
-
ASUS ROG GL503VD-FY154T doesn't start
Hello,
I have an issue with an Asus ROG Laptop with motherboard DABKLMB28A0 rev: A .
Symptoms are as it follows:
-Charging led is on when charger is connected
-When the power button is pressed, the keyboard blinks one time and then stop.
On the motherboard:
-Linear 3.3V is present
[COLOR=#e74c3c]-Linear 5V is missing
-3.3VALW is missing
-5VALW is missing [/COLOR]
On the SIO Chip:
-+3VPCU is present
[COLOR=#e74c3c]-S5_ON is missing [/COLOR]
[COLOR=#e74c3c]The SIO receives... -
Boardview LENOVO IdeaPad Gaming 3 : GOG21-LAK971P
Hello Everyone!
If anyone does have this boardview it could help me a lot.
Thank you!
-
Oh man, thank you!Leave a comment:
-
ACER E5-721: DA0ZYVMB6D0 boardiew and schematic
Hello everyone!
Hope you guys are doing well.
If someone have the boardview and/or schematic for this laptop motherboard, it could help me a lot.
Thank you in advance
-
Thank you dude, you rock!...Leave a comment:
-
+1 Thank you for providing it even if it is the pdf version
...
Leave a comment:
-
Hello Everyone,
I'm Tapa, I've always been interested in electronic. I had a chance to begin a new job as a repair technician 3 years ago, so I took it.
To be honest I started to take a look at motherboard repair 2 years ago now and I'm proud to say that I've repaired some cool stuff during those years. In the other hand I also had to let go a lot of repairs opportunity because of my lack of knowledge 😥.
I'm here because I think I found a good community with pretty much experience in repairing.Leave a comment:
No activity results to display
Leave a comment: