MSI MS-16JB (MS-16JB1) does not rise +VCCGT

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • skynet85
    Senior Member
    • Jul 2015
    • 124
    • Georgia

    #1

    MSI MS-16JB (MS-16JB1) does not rise +VCCGT

    Hello, before me, the board was flashed (main) I don't know about the EU, after pressing the main voltages rise + 3VSUS 3.3v,
    +5VSUS 5v, +1_2VDIMM 1.2v, +1.0VSUS 1v, PEX_VDD 1v, +VCCSA 1.1v, PL9 +VCCIO 0.9v, +VCC_CORE PL10 PL11 1v, +VCCGT PL12 PL13 0V resistance 4.8 ohm, PLT_RST# 3.3v EC_ALLSYSPG 3.3v , H_VCCST_PWRGD_R 1v

    Measurements PU8 ISL95855HRTZ
    1)PSYS 0
    2)IMON_B 0
    3)NTC_B 0.3
    4)COMP_B 4
    5)FB_B 0
    6)RTN_B 0
    7)ISUMP_B 0
    8)ISUMN_B 0
    9)ISEN1_B 0
    10)ISEN2_B 0
    11)FCCM_B 0
    12)PWM1_B 2.5
    13)PWM2_B 2.5
    14)IMON_A 0.1
    15)NTC_A 0.3
    16)COMP_A 2.2
    17)FB_A 1
    18)RTN_A 0
    19)ISUMP_A 1
    20)ISUMN_A 1
    21)ISEN1_A 1
    22)ISEN2_A 1
    23)ISEN3_A 5
    24)FCCM_A 5
    25)PWM1_A 0.3
    26)PWM2_A 0.7
    27)PWM3_A 2.5
    28)IMON_C 0.2
    29)COMP_C 2
    30)FB_C 1.1
    31)RTN_C 0
    32)ISUMP_C 1.1
    33)ISUMN_C 1.1
    34)FCCM_C 5
    35)PWM_C 0.3
    36)PROG5 0
    37)PROG4 0
    38)PROG3 0
    39)PROG2 0
    40)PROG1 0
    41)VIN 19
    42)VCC 5
    43)SDA 1
    44)ALERT# 1
    45)SCLK 1
    46)VR_HOT# 1

    The question due to the EU firmware may be that there is no +VCCGT or the SR2FQ CPU is dead. Thanks

Related Topics

Collapse

  • LaPCon_IT
    Ideapad 130-15IKB, LA-G202P rev.1.0 no picture, +VCCGT
    by LaPCon_IT
    Hi people,

    Ideapad 130-15IKB
    LA-G202P
    CPU: i5 8250U

    The laptop turns on without picture. All voltages are present except +VCCGT. Probably POST not starting because current stays around 300mA. I've checked resistance and voltages:

    PL602 - 28ohm - 1.0 VALWP - 1.04V present
    PL502 - 231ohm - 1.2VP - 1.2V
    PLA1 - 17ohm - VCCSA - 1.03V
    PLZ1 - 4ohm - VCCCORE - 0.84V
    PLZ2 - 4ohm - VCCCORE - 0.84V
    PLG1 - 7ohm - VCCGT - 0V

    The VCCGT comes from PUG1 (RT9610CGQW). Signals are:
    EN-5V,
    ...
    03-07-2023, 08:25 AM
  • Prott
    Surface Pro 4 - cycling VCC_CORE, no VCCGT
    by Prott
    Hello,
    I have a Microsoft Surface Pro 4 (i5, 8 GB) that originaly had a swollen battery and was crashing during Windows install. I replaced the SSD with a new one (from another surface) that had OS installed. As a result of this the Windows booted, but few seconds after the start it went into "Locking" screen and turned off.

    Now the "fun" starts:

    Upon removal of the motherboard from the case the fault changed:
    - When I start the tablet the VCCSA goes to 1.1 V for half a second and shuts off, followed by 1P2V_DUAL going to around...
    01-04-2023, 02:33 PM
  • ktmmotocross
    Asus GL553VW restart under load/SOLVED/ - What is purpose of +VCCGT ?
    by ktmmotocross
    Hello.
    Have this asus Asus GL553VW that restart under load when install or start system.
    By scope i found that middle phase not work and +VCCGT s 0V even when working. Dont have chip so i took one from +VCCGT and replace middle CPU phase IC. Now have all phases working and laptop work like it should have.

    So what is that +VCCGT for? I see that it goes to CPU so im was thinking about IGPU but i see it found and install drivers for intel without problems and works ok when nvidia drivers was not installed...
    05-25-2021, 03:29 AM
  • andrhouseolly
    Dell Precision 5510, AAM00 LA-C361P Rev:2.0 turns on, no image.
    by andrhouseolly
    Hi.
    I kindly ask you to help me solve the problem.
    Dell Precision 5510, motherboard AAM00 LA-C361P Rev:2.0
    The board turns on, there is no image.
    Read more. When the power supply is connected, the front panel indicators light up briefly.
    When you press the power button, the button indicator lights up. The board works
    there is no image, there is no matrix initialization, there is no image on HDMI.
    When turned on, the fans do not spin, but when they warm up they start spinning.
    When you turn off the button, the fans spin up to full speed for a short...
    05-11-2024, 03:14 PM
  • ktmmotocross
    Apple A1398 emc 2876 randomly black screen and fan rise
    by ktmmotocross
    Hello.
    Have this A1398 emc 2876 that randomly goes to black screen and raising fan. I know this was problem of gpu or gpu voltage controller, but this one is without gpu.

    Is there some known failure points on them or i just count on cold solder under cpu?
    01-22-2025, 12:36 PM
  • Loading...
  • No more items.
Working...