Only U3301 remove and IN-OUT pins jumper/R3314 put 0 Ohms. No need to jumper pin15-16. You have voltage on pin15 but missing voltage on pin16. Putting 0 Ohms resistor at R3314 will provide voltage to pin16. So no need to jumper pin15-16. If you jumper pin15-16, then dont put R3314 resistor.
Only U3301 remove and IN-OUT pins jumper/R3314 put 0 Ohms. No need to jumper pin15-16. You have voltage on pin15 but missing voltage on pin16. Putting 0 Ohms resistor at R3314 will provide voltage to pin16. So no need to jumper pin15-16. If you jumper pin15-16, then dont put R3314 resistor.
I've no more ideas. Its soc fault which I tried to bypass but in the end got backlit only. Sorry bro but I can't help further. May be others can chip in
I've no more ideas. Its soc fault which I tried to bypass but in the end got backlit only. Sorry bro but I can't help further. May be others can chip in
Hello!
I would like help with a Lenovo S145-15IWL nm-c121 motherboard, there is no picture on the display, but there is hdmi!
With display, lvds no problem!
The lid has been hit hard, it hasn't worked since!
Hello!
I would like help with a Lenovo S145-15IWL nm-c121 motherboard, there is no picture on the display, but there is hdmi!
With display, lvds no problem!
The lid has been hit hard, it hasn't worked since!
Comment