lENOVO g50-80 NM-a361 - Is SIO flash needed?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ktmmotocross
    Boardkiller
    • Feb 2014
    • 3578
    • slovakia

    #1

    lENOVO g50-80 NM-a361 - Is SIO flash needed?

    Hello.
    Have this LENOVO g50-80 NM-a361 - that came with burn mark on SIO. after change i have All voltages but no video and SIO have heat right from whwre was burn mark on original sio. After next change i have no CPU, GPU, MEM voltages, but sio is not heated. So must be sio flashed when replaced on this king of models?
  • mcplslg123
    Badcaps Legend
    • Jun 2015
    • 7262
    • india

    #2
    Re: lENOVO g50-80 NM-a361 - Is SIO flash needed?

    Originally posted by ktmmotocross
    Hello.
    Have this LENOVO g50-80 NM-a361 - that came with burn mark on SIO. after change i have All voltages but no video and SIO have heat right from whwre was burn mark on original sio. After next change i have no CPU, GPU, MEM voltages, but sio is not heated. So must be sio flashed when replaced on this king of models?
    SIO Number?? You are experienced enough to find out whether its programmable or not.

    Comment

    • ktmmotocross
      Boardkiller
      • Feb 2014
      • 3578
      • slovakia

      #3
      Re: lENOVO g50-80 NM-a361 - Is SIO flash needed?

      Originally posted by mcplslg123
      SIO Number?? You are experienced enough to find out whether its programmable or not.
      yes but there are some programable that is programmed from bios on start

      Comment

      • khaahk
        Badcaps Veteran
        • Dec 2013
        • 759
        • Estonia

        #4
        Re: lENOVO g50-80 NM-a361 - Is SIO flash needed?

        Lenovo usually needs to be programmed.

        https://www.badcaps.net/forum/showpo...2&postcount=15
        Last edited by SMDFlea; 10-20-2021, 02:31 PM.

        Comment

        • DanielDacko
          Badcaps Veteran
          • Mar 2015
          • 325
          • Macedonia

          #5
          Re: lENOVO g50-80 NM-a361 - Is SIO flash needed?

          According to NM-A362 which is similar, I/O is IT8586E, which is programmable.
          I don't provide help for people using CH341A and a clip.

          Comment

          Related Topics

          Collapse

          Working...