Hi,
I am trying to repair an MSI GE75 10SF laptop screen (the HDMI output works but the laptop screen doesn't).
I bought it without a screen in it second hand and was told it just needed a screen. I bought a 300hz screen for it, LCD model number B173HAN05.1, and a ribbon cable which I thought would connect the LCD to the board. The LCD fits into the frame OK but the LCD end of the ribbon doesn't fit into the connector on the LCD.
I attach photos of the motherboard end of the cable I bought (mbconnector.jpg), which fits correctly into the motherboard, and the other end of the cable which doesn't fit into the LCD (LCDEnd.jpg). I also attach a photo of the LCD input (Screen input.jpg).
This is the laptop specs page:
https://www.msi.com/Laptop/GE75-Raid...176b3e5fS7gKgl
This is the LCD which I have technical details page:
https://www.panelook.com/B173HAN05.1...ter_44168.html
This is the cable I have:
https://es.aliexpress.com/item/40003...176b3e5fS7gKgl
The dimensions of the LCD are right, the refresh rate (300 hz) appears to be supported according to the MSI page (though I'm not 100% sure), and the resolutions match.
Could I get some help with whether I need another LCD at this point, or whether the B173HAN05.1 will work if I find the right cable?
If I find a way to connect the MB to this LCD will it likely work?
Thanks for any help.
I am trying to repair an MSI GE75 10SF laptop screen (the HDMI output works but the laptop screen doesn't).
I bought it without a screen in it second hand and was told it just needed a screen. I bought a 300hz screen for it, LCD model number B173HAN05.1, and a ribbon cable which I thought would connect the LCD to the board. The LCD fits into the frame OK but the LCD end of the ribbon doesn't fit into the connector on the LCD.
I attach photos of the motherboard end of the cable I bought (mbconnector.jpg), which fits correctly into the motherboard, and the other end of the cable which doesn't fit into the LCD (LCDEnd.jpg). I also attach a photo of the LCD input (Screen input.jpg).
This is the laptop specs page:
https://www.msi.com/Laptop/GE75-Raid...176b3e5fS7gKgl
This is the LCD which I have technical details page:
https://www.panelook.com/B173HAN05.1...ter_44168.html
This is the cable I have:
https://es.aliexpress.com/item/40003...176b3e5fS7gKgl
The dimensions of the LCD are right, the refresh rate (300 hz) appears to be supported according to the MSI page (though I'm not 100% sure), and the resolutions match.
Could I get some help with whether I need another LCD at this point, or whether the B173HAN05.1 will work if I find the right cable?
If I find a way to connect the MB to this LCD will it likely work?
Thanks for any help.
Comment