820-3435-B THSP Thunderbolt proximity temperature sensor problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mantza
    Member
    • Sep 2020
    • 36
    • GREECE
    #1

    820-3435-B THSP Thunderbolt proximity temperature sensor problem

    hello, i have this board have replaced smc u5000 and u5810 but it is slow and goes high fan after a few secconds
    in asd it gives this error

    Sensor-Temperature THSP Thunderbolt proximity test 1

    error sensor is reading below the low limit

    any clues?
    Tags: None
    • piernov
      Super Moderator
      • Jan 2016
      • 4435
      • France
      #2
      Re: 820-3435-B THSP Thunderbolt proximity temperature sensor problem

      Only error when continuing on error?

      https://logi.wiki/index.php/Mac_sens..._2013_820-3435
      OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

        Comment

        • mantza
          Member
          • Sep 2020
          • 36
          • GREECE
          #3
          Re: 820-3435-B THSP Thunderbolt proximity temperature sensor problem

          Originally posted by piernov
          Only error when continuing on error?

          https://logi.wiki/index.php/Mac_sens..._2013_820-3435
          yes

            Comment

            Previous template Next

            Related Topics

            Collapse
            • CapLeaker
              AcuRite 5 in 1 temperature sensor replacement repair
              by CapLeaker
              Got a new victim:

              AcuRite 5 in 1 Iris outdoor weather station not updating the temperature / humidity anymore. The original sensor is a SHT21. Also there are identical other sensor manufacturers. I chose the HTU21D to replace the original SHT21. Both have identical specs. I've had two failure modes with these sensors.
              A: outside temp stuck at -40? It's cold here at times in Canada, but not that cold!
              B: stuck at some temperature and maybe updating once in 12 hrs or so.

              Easy solution is to go to AcuRite website and purchase the sensor. Right?...
              04-15-2025, 01:32 PM
            • groomit
              Google Pixel 5 - Proximity Sensor Issues - Reflow/Replacement procedure tipps wanted
              by groomit
              Hi,
              I just replaced the battery on a Google Pixel 5.
              After that the proximity sensor isn't functioning properly any more. It is constantly activated. So when playing a voice message on Whatsapp, the Screen instantly turns off.
              Checking with a sensor app I can verify weird behavior of the sensor. It is triggered when nothing is near and sometimes works correctly when squeezing the phone next to the sensor hole.
              The rubber seal is on again (as mentioned in various suggestions in other forums).

              This smells like a cold or broken solder joint. So I'd like to reflow...
              06-11-2025, 02:21 AM
            • drake441335
              OLED65G6P-U.BUSWLJR Temperature sensor issue
              by drake441335
              I am a very beginner at tv repairs. I am trying to fix my tv before I end up buying a new one. I do not know names of boards, but I will do my best to explain what I have done so far.
              Tv is an LG OLED65G6P manufactured in april 2016. I had a warranty on it till September of 2021. Warranty is done. The problem I am having is when I turn the tv on after about two or so minutes a popup comes up and says the temperature sensor issue, and then it powers itself off. The tv works as designed, picture, sound, wifi, settings and everything, before it just powers itself down.
              So i did what any...
              02-13-2022, 03:34 PM
            • ErParucca
              Thinkpad X390 (motherboard NM-B891 shared with other models) : battery sensor reporting wrong temperature -> sudden power off
              by ErParucca
              I have a thinkpad X390 that would work fine if not for a problem: sensor temp5 (battery as far as I know) shows variable values over 100° C. When it reaches higher temps (I guess 110° as I was able to list temperatures up to 109°) it simply powers off. All other sensors show 0° except for the CPU which seems to report correct temperatures.

              In a wishful thinking I hoped replacing the battery (as far as I know the temperature sensor is in the battery) would fix the problem, but it didn't.

              Given this situation I can't even upgrade the firmware as the machine powers off...
              07-10-2025, 10:46 AM
            • CG2
              Meaco Arete One / Deye Dehumidifier not working
              by CG2
              I've got a dehumidifier that has stopped working. Plug it in, press the power switch, and it beeps 5 times. Nothing showing in the display (which is just two 7 segment displays) apart from the two decimal points flashing. The model is a MeacoDry Arete One 18L, which seems to be a rebadged Deye (all the boards are marked Deye). Here's what I've got so far (details in case anyone else in future should need them).

              Starting with the power board. Mains power comes in at the red connector top left. The compressor is powered by the orange connector to the right of that and is switched by...
              Power Board Front
              5 Photos
              08-17-2024, 07:47 AM
            • Loading...
            • No more items.
            Working...