Please Help Me Identify This IC? DAZHKDMB6E0 REV E MB
Hi thiis is a part of a DAZHKDMB6E0 REV E MB i dont have any schematic though , if someone can help me..
Thanks to someone can help me
Thanks to someone can help me
-
-
Re: Please Help Me Identify This IC?
because Im getting short form PIN1 -
Re: Please Help Me Identify This IC?
short to ground is it ?Comment
-
Re: Please Help Me Identify This IC?
See post number 2 in the "IC Marking Codes and Datasheets" sticky thread, the IC is a Richtek
The quanta zhkd schematic is freely available it only takes a quick google search
https://drive.google.com/file/d/1vlJ...sLM5yOCCE/view
.Last edited by SMDFlea; 12-07-2020, 11:09 PM.Comment
-
Re: Please Help Me Identify This IC?
rt5041agqw is this right sir?Comment
-
Re: Please Help Me Identify This IC?
Yes thats the right one
https://www.datasheets.com/en/datash...ation-63421895Attached FilesComment
-
-
Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .
... -
Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC
I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?
Any help would be appreciated... -
I mistakely pluged 100v japanese retro game console to 220v outlet.
So It seems that glass fuse and varistor have been blew up.
I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
Is there any way to identify varistor type in my sega saturn PSU?
Any reply would be appreciated.
EDIT:
It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage... -
Hi guys , i hope this is the right place , i got Plasma Samsung PS-50Q91H and i need to repair Ymain LJ41-05120A , but those component are burn and i can not identify to replace those part , and the part are blue capacitor and the location are C5105 and C5106 and here i attach the part that need to identify , and one more thing , i also need to replace Zener Diode on location ZD5502 and the part are BZV55C because mine is short but i don't know the voltage because those parts are release with many type of voltage. Looking forward for your kindly reply
05-21-2024, 02:32 AM -
Hello, I have a legion pro 5 16arx8 serial number pf4bf4aw mb code nm-f251 rev1.0 which was dissasembled by the client for cleaning. Now it does start but for 20 secs after that fans run at maximum and then shut down. Found PU8302 burned but cannot identify it the part. It is written eHFAA on it but didn't found any info, no boardview, nothing. Can anyone help identify the part so I can order it from somwhere? Ataching some pictures of the motherboard, serial number and part. Than\k you...
Comment