Hi this board has no power if I plugged the charger but If I put voltage over the P2 section it will power on the unit , I already change the PQ6414A (pq201) but it wont pass the voltge to the pin 3 ,


those the PU201is faulty ?
how can it be identified?
Link to schematic -> https://www.badcaps.net/forum/showthread.php?t=116545
.
those the PU201is faulty ?
how can it be identified?
Link to schematic -> https://www.badcaps.net/forum/showthread.php?t=116545
.
Comment