A1466 820-00165 fan spin, no chime vcore present

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • willumpie82
    Member
    • Oct 2015
    • 13
    • Netherlands

    #1

    A1466 820-00165 fan spin, no chime vcore present

    Hi all,

    I'm working on a rabbit-hole again, I have a 820-00165 board that has not been damaged (no liquid or other nasty stains).
    It came with the story that it runs but freezes randomly, when we looked at it at first it came to the disk selection and then frozen now it won't display or chime at all. I removed the SSD and wifi and inserted a USB drive, no changes.

    So opened it up removed the battery and when powering it on it gets fan spin but no chime and no image, looks brain dead to me...

    on visual inspection the board looks mint

    I Checked al the common voltage rails (mostly I just probe all coils) and look at the schematic if i see something weird.

    In this case they looked fine. also the two vcore phases rails are present (1.2v). I inserted a USB thumb drive and noticed the led on it to go on and off again constantly. the CPU gets a little warm as I would normally expect. Than I took my oscilloscoop and probed the 5v usb rail which was present and stable, I also probed the bios MISO line (slave out) and there seems to be data.
    to me it looks to be bootlooping but don't know why, (I checked all 820-00165 Rossmann videos but no clues)
    Last edited by willumpie82; 05-26-2020, 02:43 AM.
    www.badcaps.net
  • piernov
    Super Moderator
    • Jan 2016
    • 4435
    • France

    #2
    Re: A1466 820-00165 fan spin, no chime vcore present

    Inspect board under microscope for any hint of liquid or physical damage/knocked off component.
    VCore should be 1.7V so double check that.
    OpenBoardView — https://github.com/OpenBoardView/OpenBoardView

    Comment

    • willumpie82
      Member
      • Oct 2015
      • 13
      • Netherlands

      #3
      Re: A1466 820-00165 fan spin, no chime vcore present

      Hi

      The vcore rail and is is 1.8v

      also verified all the other rails, all OK

      ppbus_3gh = 8,57
      PPBUS_S5_HS = 8,57
      PPBUS_S5_HS_OTHER = 8,57
      PPDCIN_G3H = 17,94
      PPDCIN_G3H = 17,94
      PP3V42_G3H = 3,42
      PPVRTC_G3H = 3,34

      PP5V_S5 = 5,109
      PP5V_S4RS3 = 5,11
      PP5V_S0 = 5,11

      PP3V3_S5 = 3,34
      PP3V3_S4 = 3,34
      PP3V3_SUS = 3,34
      PP3V3_S3 = 3,34
      PP3V3_S0 = 3,35
      PP3V3_S4SW_SNS = 3,34
      PP3V3_S0SW_SSD = 3,34
      PP3V3_S4_TBTAPWR = 3,34

      PP1V8_S3 = 1,79

      PP1V2_S3 = 1,20

      PP1V05_SUS = 1,05

      PP1V5_S0 = 1,51

      PP0V6_S0_DDRVTT = 0,6

      PP1V05_S0 = 1,049
      PP1V05_S0SW_PCH_HSIO = 1,049

      PPVCC_S0_CPU = 1,80

      when assembled + ssd = current is 665mA
      www.badcaps.net

      Comment

      • Lukira
        New Member
        • Feb 2021
        • 2
        • United States

        #4
        Re: A1466 820-00165 fan spin, no chime vcore present

        I have a board with exact same issue. Have you found a solution??

        When I got the computer I noticed that the bottom case had a dent right on top of the fan and the fan housing was bent preventing it to turn. I bent back the housing and turned on the computer.
        It booted normally but the screen was dark and the brightness button wasn't working.
        At first I thought it was freezing because the cpu was overheating because the fan wasn't spinning but no... after that it would turn on only sometimes and when it did, it would freeze.
        After that it didn't booted anymore. I have vcore phase 1 and 2 and cpu gets a little warm, fan spins but no chime or image.
        The board was very dusty but no corrosion at all.

        Comment

        Related Topics

        Collapse

        • platinumsteel
          Macbook Pro 2012 CPU Vcore Present No Post
          by platinumsteel
          Hi guys hoping you can help me solve this issue. I have 3x 820-3115 boards. One fully working with CPU Vcore 0.8v and posting which am using to compare against the other 2...The other 2 has CPU Vcore stuck at 1.12v and doesn't drop down to 0.8v.
          PPBUS_G3H is 8.56v and all other rails present. They both do not post or give picture and no caps lock. Hoping anyone may have experience with this and advise me on a few things to try. So far the only thing i tried was a few different bios for this board and nothing changed same behavior persists I have the original backups saved.Thx...
          01-08-2025, 04:18 PM
        • zpi
          A1466 820-00165 Chime and freeze on osc loading, with battery no chime.
          by zpi
          Hey guys, so i have here really strange board...

          These steps needs to be done to get a chime board starts to load osx but freezes with no loading bar:

          1.Disconnect battery
          2.P+R+CMD+OPT to pram reset
          3.After only 2-7 atempts to pram reset i get chime.
          4.Then i get chime allways, but if i connect battery, then boards stops to chime till i make steps from 1 to 3.

          Board looked very clean, no liquid damage. Already replaced isl6259 and SMC, good known battery. Still same problem, sometimes turned off board without battery uses 0.03...
          11-10-2020, 04:42 PM
        • moscast
          No +VCORE in acer TravelMate TMP2510
          by moscast
          Hi everyone
          I have a problem with this laptop that won't turn on.
          The +VCORE is not present and doing some measurements on the ISL95859 I notice this:

          VIN present 19.5V
          VCC present 5V
          VR_ENABLE present 3.3V
          PWM_A present 2.5V
          FCCM_A not present
          PWM1_B present 2.5V
          PWM2_B present 2.5V
          FCCM_B not present
          PWM_C present 0.32V
          FCCM_C present 5V

          In these conditions should the ISL95859 works and therefore enable the FCCM_A and FCCM_B pins or do I have to check other lines for it to be enabled?
          Maybe the...
          04-06-2024, 01:49 AM
        • j.bisous
          MacBook Air A1466 - No chime, no picture, fan spinning
          by j.bisous
          Hello!
          I just got and MacBook Air A1466 EMC 2925 (820-00165-A) but it doesn't chime with not light on keyboard and black screen, just the fan spinning.
          I noticed something weird with the fan:
          - When the charger is connected, he powers up on his own (one time fan spining for 5 seconds, stops, then solid normal fan spining until I force the shutdown).
          - When I try to run the Mac on battery, he is just power cycling (fan spinning for 10-15 seconds and then stop before restarting again and so on).
          I already tried to refalshed the BIOS: nothing changed.
          ...
          04-15-2021, 02:09 PM
        • mikzs
          Rx580 8gb sapphire nitro+ turn off vcore randomly
          by mikzs
          Hello, this is my first post, English is not my native language but I hope you understand me. I recently got a 580 that didn't turn on the typical short mosfet, as I didn't know exactly which one was short, I unsoldered them until I got the bad one out, I was able to remove the short and identify the bad mosfet, the gpu gives video again! but it has a problem that completely turns off vcore at random times or if I try to put a load on the gpu vcore drops to 0 I don't have much idea why because I don't know much about sapphire, any advice on where I could start looking or what problem it could...
          11-06-2023, 12:28 PM
        • Loading...
        • No more items.
        Working...